Loading ...
Loading ...
Loading ...
24
WIRING DIAGRAM
WARNING:
Never connect valve to line voltage.
Failure to follow this will result in damage to equipment and could result in severe injury or death.
WIRING INSTRUCTIONS:
Follow the wiring instructions furnished by the appliance manufacturer, if available, or use the
following general instructions. Appliance manufacturers instructions always supercede these
instructions.
All wiring must comply with applicable electrical codes and ordinances.
Disconnect the appliance power source before making any electrical connections to prevent the
possibility of electrical shock or damage to equipment.
1. Check the millivolt rating on the gas valve and make sure it matches the available supply. Install
thermostat and other accessories as required.
2. For the Millivolt Plus, connect thermocouple to convenient upper or lower connection port. Hand
tighten, and then rotate 1/4 turn with wrench.
3. Connect the Thermo-generator leads to TPTH and TP terminals on main operator coil.
4. This valve may only be used in self-generating systems. Use only components speciîš¿cally
designed for use in a millivolt system.
INSTALLATION
Wall Switch
Option 1
Option 2
We Recommend
24 AWG, stranded wire with 2 conductors and PFA insulation
We give no detail on what type of wire to use to hook up tstats or switches, no detail what type of wall
switch to use or how to wire it.
Loading ...
Loading ...
Loading ...