Loading ...
Loading ...
Loading ...
3.9 Rinse Plus Touchpad ( )
3.10 Prewash Touchpad ( )
ENGLISH 9
This option is recommended for people
who are allergic to detergents, and in
areas where the water is very soft.
Select this option if you wish your
laundry to be pre-washed before the
main wash. Use this option for heavy
soil. The indicator of this option comes
on.
When selecting this option the laundry is
gently washed and spun to avoid
creasing. In this way ironing is easier.
The indicator of this option comes on.
3.11 Easy Iron Touchpad ( )
Select this option to add approximately
60 minutes of tumbling in vapour during
the wash cycle. Vapour helps open
fabric fibers up to allow laundry additives
to release tough stains.
3.12 Vapour Touchpad ( )
3.13 Start/Pause Touchpad ( )
You can cancel the delay time at any
moment, by pressing “Delay Start”
touchpad repeatedly till the display
shows delay time “ ”, then press the
Start/Pause touchpad.
Press it to add rinsing phases to a
program. The indicator of this option
comes on.
Vapour may not necessarily be
visible inside the drum during a
vapour wash cycle. Vapour is
created below the drum and
allowed to naturally rise into the
clothes.
At the end of the Vapour cycle
the clothes will be warmer,
softer and detached from the
drum.
To start the selected program,
press the “Start/Pause”.
To interrupt a program which is
running, press the “Start/Pause”
to pause the machine.
To restart the program from the
point at which it was interrupted,
press the “Start/Pause” again.
If you have chosen a delayed
start, after pressing “Start/Pause”
the machine will begin the
countdown.
If Vapour option is selected,
rinse temperatures will be
elevated.
During a vapour cycle you may
notice vapour exiting from the
drain hose of the washing
machine, this is normal and
there is no cause for alarm.
Vapour may not be present
during the entire vapour wash
cycle.
Vapour function is more
effective with half load.
NOTE:
When you set this function, put the
detergent into the “ ” compartment.
(Refer page 15-16)
This function increases the program
duration.
Loading ...
Loading ...
Loading ...