Garmin 010-02464-00 Index BPM Smart Blood Pressure Monitor

User Manual - Page 18

For 010-02464-00.

PDF File Manual, 28 pages, Read Online | Download pdf file

010-02464-00 photo
Loading ...
Loading ...
Loading ...
UDI
Unique device identification.
Error Codes
Error codes may appear on the device screen to indicate a problem with the device (Tips for Getting a Good
Measurement, page3). If your Index BPM device displays an error code, you should remove the device from your
arm and turn the device off and on before attempting another measurement.
The device battery level is low.
E1 The device did not detect a measurement.
E2 The cuff did not inflate properly or has a leak.
E3 The measurement is incorrect.
E4 The device timed out while the cuff was inflating or deflating.
E5 The cuff is partially inflated.
E6 The measurement exceeded the maximum blood pressure value.
Manufacturer Information
Ya Horng Electronics Co., Ltd.
www.yahorng.com
+886-6593-2201
No. 35, Shalun, Anding Dist., Tainan City, TAIWAN
Radio Frequency Radiation Exposure
This device is a portable transmitter and receiver that uses an internal antenna to send and receive low levels
of radio frequency (RF) energy for data communications. The device emits RF energy below the published limits
for portable use when operating in its maximum output power mode and when used with Garmin authorized
accessories. To comply with RF exposure compliance requirements, the device should be used as described in
the manual. The device should not be used in other configurations.
RF Exposure Information (SAR)
This device meets the government's requirements for exposure to radio waves. This device is designed and
manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. The exposure standard employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are
conducted using standard operating positions accepted by the FCC with the EUT transmitting at the specified
power level in different channels. The FCC has granted an Equipment Authorization for this device with all
reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this
device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov after searching
on FCC ID:Z5O-BP707.
14 Device Information
Loading ...
Loading ...
Loading ...