Loading ...
Loading ...
Loading ...
8
Explanatory diagram N3140
1 Air cap
2 nozzle
3 Union nut
4 Air hose
5 Spray gun
6 Material adjustment screw
7 Trigger
8 Container
9 Motor blower
10 ON/OFF switch
11 Mains cable
12 Strap
Preparation of the coating material
Information regarding a sprayable dilution is normally not to be found on the material
tin.
Therefore , use the viscosity table viscosity =thickness of the coating material page 9
Measuring the viscosity
using the viscosity
measuring cup
1. Thoroughly stir the coating material
before starting measure
ment.
2. Immerse the viscosity measuring cup (contents 100cm
3
) completely in the coating
material below rim level and allow to fill.
3. Lift the viscosity measuring cup and measure the time in seconds until the flow of
coating material stops.
This run-out time is called DIN seconds (DIN-s).
Viscosity table see page 9
Loading ...
Loading ...
Loading ...