Loading ...
Loading ...
Loading ...
Spectification
2>When setting each of
3>
" "
When setting each of
enter
4> ,
,
During time function setting
function setting
5> 15 200We suggest that you run the oven elements for minutes at degrees to burn off any residuce
from their surfaces.
Full automatic programming-:
This function is used to cook after a certain period of time with a certain duration The food to be cooked,.
is put into the oven The oven is adjusted to the desired cooking function The oven temperature is adjusted..
.to the desired degree depending on the food to be cooked
First: " " " " . " +" "- "Press button until you see Dur on the timer screen Use button to adjust cooking
period for the food you wish to cook.
the day s
the screen and the symbols A will begin to continuously light on the screen.
""
Second: keep pressing on button until you see End on the timer screen When you see End on"" " " . " "
the timer screen,
will appear on the screen and the
symbol A will begin to continuously light on the screen"" .
You can set a time which can be up hours after the time obtained by adding the cooking23.59
period to the day s time'.
The oven will start operating at the time calculated by deducting the cooking period from the set finishing
time and will stop at the set finishing time The timer will give an audible warning and the symbol A will,. ""
begin to flash After bringing the cooking function and oven temperature to position.. "0" .
.
Please note Once setting full automatic mode all the time can not be changed Change time means cancle:-, .
automatice progamme and enter into corresponding mode If you need to reset automatic mode need to.,
stop setting the current mode to set the automatice mode according to the above steps again,.
Press
""
button to confirm,
time will appear on
Use " +" "- " button to adjust finishing time,
Press
""
confirm,
button to
the day's time
The symbol
disappears until the time cooking starts.
""
knob
it will stop the audible warning
button less than 3 seconds,
Pressing
any
.
Pressing" "
for more than 3 seconds set the oven to Manual mode again to use the oven.
the time function,
if there is none operation for 5
inutes then it will return to
manual mode.
current setting and
the time function,
pressing on
for more than 3
manual mode.
a beep sounds it
pressing on
"+"and
or
more
than
3
seconds
the curent time
cancle
f
and enter standby mode.
" "
can
seconds can cancel
'
m
1>When setting the date of each function, long press on"+" or "-" for more than 3 seconds, the date
will progressively and rapidly increase or decrease.
7
Loading ...
Loading ...
Loading ...