Loading ...
Loading ...
Loading ...
13
M6000-01 • 04/16/12 • Casablanca Fan Company
8 • Installing the Wall Control
WARNING! To avoid possible electrical shock,
make certain that electricity is turned off at the
circuit breaker or fuse box before attempting any
installation or repair procedure.
9-1.
Use only the Casablanca wall control.
Note: Wall Control should only be used on
Casablanca 5xxxx Series Fans.
9-2. Do not use any additional control with your fan (for
example, dimmer, or fan speed control).
9-3. Remove the screws and cover plate from the existing
switch box.
9-4. Remove the screws holding the switch in the switch box.
9-5. Pull the existing switch from the switch box to expose
the wire connections.
9-6. Remove the wires from the switch.
9-7. Connect black wire (ungrounded) to black wire
(ungrounded), white wire (grounded) to white
wire (grounded), and green or bare copper wire
(grounding) to green or bare copper (grounding).
Make sure each wire connection is secured with a
wire connector.
9-8. Push all connections to the back of the switch box.
Be sure to separate the grounded wires from the
ungrounded wires inside the switch box.
9-9. Insert wall control into outlet box, and secure using
the two switch mounting screws.
9-10. Install the cover plate using a Phillips Head
screwdriver to secure the two cover plate screws.
Note: e wall control is mounted in the switch box,
but is not wired into the box. It is battery operated.
Steps 9-3
Steps 9-7
Steps 9-8
Steps 9-9 Steps 9-10
Loading ...
Loading ...
Loading ...