Loading ...
Loading ...
Loading ...
13
OPERATING INSTRUCTIONS
Note:
This receiver has a preset memory function;
when the switch is turned OFF, the control will
remember the light intensity and fan speed. When the
switch is turned ON, the light and fan will resume
operation as they were prior to the switch being turned
OFF.
5. The buttons on the remote control the fan speed and
light as follows:
1
2
3
4
5
6
7
8
Fan ON/OFF
Brightness 25%
Brightness 50%
Brightness 75%
Brightness 100%
9
Light Dimmer switch:
a.) on “DIM”: with dimmer function.
b.) on “ON” : without dimmer function
Note: Factory set is on “DIM” position. If the light is
not dimmable, slide it to “ON” position, otherwise it
may cause the light to flicker.
CARE AND MAINTENANCE
Important:
Shut off main power supply before beginning any maintenance. Do not use water or a
damp cloth to clean the ceiling fan.
. At least twice each year, tighten all screws and lower canopy to check mounting plate screws.
. Clean fan housing with only a soft brush or lint-free cloth to avoid scratching the finish. Clean blades
with a lint-free cloth. You may occasionally apply a light coat of furniture polish to wood blades for
added protection.
5
ON
DIM
ON
DIM
9
Loading ...
Loading ...
Loading ...