Loading ...
Loading ...
Loading ...
Privacy Code Scan
•
Your microTALK radio can automatically scan the Privacy Codes (either
CTCSS 01 through 38 or DCS 01 through 83) within one channel. Only
one set of privacy codes (CTCSS or DCS) can be scanned at a time.
To scan privacy codes:
1. While in Standby mode, press and release the
Scan button twice (CTCSS) or three times (DCS)
until the CTCSS or DCS icon and numbers are
flashing.
2. Press and hold the Scan button to begin scanning
privacy codes within the selected channel.
The Scan icon will continue to be displayed when
privacy code scan is on. Your radio will continue
to scan privacy codes and stop as an incoming
transmission is detected. Your radio will remain on
that channel/privacy code for 10 seconds.
During scanning (while receiving an incoming
transmission),
you can choose from the following:
a. Press the Mode/Power button to enter the new
setting and proceed to other functions.
b. Press Talk or Call/Lock button to enter the new
setting and return to Standby mode.
c. Do not press any buttons for 15 seconds to enter
the new setting and return to Standby mode.
Operation
Mode Functions
Operation
14
15
Nothing Comes Close to a Cobra
®
Select Channel
Scan Privacy Codes
Channel Scan
•
Your microTALK
®
radio can automatically scan channels.
To scan channels:
1. Press and release the Scan button until the Scan
icon and the channel numbers appear
on the display.
2. Press and hold the Scan button to begin scanning
channels.
The radio ignores specific privacy
codes while scanning channels.
The Scan icon will continue to be displayed when
scan is on. Your radio will continue to scan all
channels and stop if an incoming transmission is
detected. Your radio will remain on that channel for
10 seconds.
During scanning (while receiving an incoming transmission),
you can choose from the following:
a. Press and hold the Talk button to communicate on that channel.
Your radio will remain on that channel and return to Standby mode.
b. Press the Channel Up or Channel Down button to resume
scanning channels.
c. Press and hold the Scan button to return to Standby.
Memory Scan
•
Your microTALK radio can automatically scan memory channels.
To scan Memory channels:
1. Press and release the Scan button while you are
on Memory Standby mode until the Scan Mem
starts flashing.
2. Press either Channel Up or Channel Down to
begin scanning memory channels.
The Scan Mem will continue to be displayed when
scan is on. Your radio will continue to scan all memory
channels and stop if an incoming transmission is
detected. Your radio will remain on the channel for
10 seconds.
Scan Channels
HI / LO
SCAN
Scan Button
Channel Button
HI / LO
SCAN
Channel Button
HI / LO
SCAN
HI / LO
SCAN
Scan Button
HI / LO
SCAN
Scan Button
Channel Button
HI / LO
SCAN
Memory Scan continued
•
During scanning (while receiving an incoming transmission),
you can choose from the following:
a. Press and hold the Talk button to communicate on that channel.
Your radio will remain on that channel and return to Memory
Standby mode.
b. Press the Channel Up or Channel Down button to resume
scanning channels.
c. Press and hold the Scan button to return to Memory Standby.
CXT645_MANL_vB.indd 14-15 9/24/14 3:15 PM
Loading ...
Loading ...
Loading ...