Loading ...
Loading ...
Loading ...
_" CHECKLIST
Before you operate your new snow
thrower, to ensure that you receive the
best performance and satisfaction from
this quality product, please review the
following checklist:
_' All assembly instructions have been
completed.
_' The discharge chute rotates freely.
_' No remaining loose parts in carton.
_' Check the fasteners. Make sure all
fasteners are tight.
_' Check the air pressure of the tires.
Correct air pressure is from 14 to 17
PSI. See the side of the tire for maxi-
mum inflation. Do not exceed maxi-
mum inflation.
_' On electric start models, the unit was
shipped with the starter cord plugged
into the engine. Before operating, un-
plug the starter cord from the engine.
While learning how to use your snow
thrower, pay extra attention to the fol-
lowing important items:
_' Engine oil is at proper level. Use a
high quality detergent oil classified
"For Service SG, SH, S J, SL, or
higher".
_' Make sure gas tank is filled properly
with clean, fresh, unleaded gasoline
with a minimum of 85 octane.
_' Become familiar with all controls-
their location and function. Operate
controls before starting engine.
F-051015L 11
Loading ...
Loading ...
Loading ...