Loading ...
Loading ...
Loading ...
Before you callfor service.., gecom
Troubleshooting Tips
Save time and mone_l! Review the chart below first and you
may not need to call for service.
Possible Causes What ToDo
Thereis no hot water There isno gas, water or • Hake suregas,water and power are turned on.
when tap is opened electricitg flowing to unit.
Thesgstemrequires • Ensurefaucet aerators are clean and faucet flows at least
approximatelg 0.6gpm 0.6gpm of hot water.
minimum flow to activate • Duringsummer months, increase the temperature setting
the heater, at the control or increasethe water flow.
Water gets cold when If the fiow from the tap was • Duringsummer months, increase the temperature setting
hot water isbeing used adjusted to lessen it, the flow at the controlor increasethe water flow.
mag have gone below the • Water flow might beincreased bg cleaning the aerators
minimum required, on the faucets.
White smoke comes out During colder weather, when
ofthe exhaust the exhausttemperature ismuch
hotter than the outside air, the
exhaust fumes condense,
producing water vapor.
When o hot tap is
opened, hot water
does not come out
immediately
Hot water must travel through the
plumbing from the water heater to
the faucet, The time period for hot
water to reach the fixture is determined
bg the amount of water in the plumbing
sgstem between the water heater and the
fixture, water pressure and the flow rate
of the fixture.
After hot water top is
turned off, fan on water
heater continues to run
Thefan isdesignedto continue running
for a short time after the flow of water stops.
This is to ensure constant water temperatures
during rapid starting and stopping, as well as
exhausting ang residual gas flue products
from the unit,
Display shows
temperatures between
37°and 60_.
Control isdisplaging temperature • Change controlto Fahrenheit.Seepage 6.
in Celsius.
13
Loading ...