Loading ...
Loading ...
Loading ...
100882 - CULTIVATOR
MAINTENANCE
18
Intake Air Cooling Vent
– Never touch the cylinder, muffler, or spark plugs with your bare
hands immediately after stopping the engine. The engine can
become very hot when in operation, and doing so could result
in severe burns.
– When checking the machine before using it, check the area
around the muffler and remove any debris. Failing to do so
could cause the muffler to become overheated, and that this in
turn could cause the engine to catch on fire. Always make sure
that the muffler is clean and free of debris before use.
– Check the intake air cooling vent and the area around the
cylinder cooling fins after every 25 hours of use for blockage.
Note that it is necessary to remove the engine cover in order to
view the upper part of the cylinder.
Procedures to be Performed After Every 100
Hours of Use
– Remove the muffler, insert a screwdriver into the vent, and
wipe away any carbon buildup. Wipe away any carbon buildup
on the muffler exhaust vent and cylinder exhaust port at the
same time.
– Tighten all screws, bolts, and fittings.
– Check to see if any oil or grease has worked its way in
between the clutch lining and drum, and if it has, wipe it away
using oil-free, lead-free gasoline.
Maintenance Schedule
Follow the service intervals indicated in the schedule below.
Service your cultivator more frequently when operating in adverse
conditions. Contact our help line at 1-877-338-0999 to locate the
nearest Champion Power Equipment authorized service dealer for
your cultivator or engine maintenance needs.
BEFORE USE
Wipe out fuel leaks, fuel spillage.
Inspect and clean fuel tank, air filter and fuel filter.
EVERY 25 HOURS
Clean cylinder fins and intake air cooling vent.
Clean air filter.
EVERY 50 HOURS
Clean and readjust spark plug gap
(gap: 0.020-0.028 in. (0.5-0.7 mm) replace if necessary).
Clean exhaust port.
Clean air filter.
ANNUALLY
Replace spark plug.
* Time intervals shown are maximum. Actual use and your experience will
determine the frequency of required maintenance.
Loading ...
Loading ...
Loading ...