Loading ...
Loading ...
Loading ...
14
Lowes.com/harborbreeze
FINAL INSTALLATION
1. Remove the two mounting bracket screws (GG) from
the mounting bracket (A) and loosen the other two
screws about 1/4 in. Then align the canopy (B) up to
the ceiling over the loose mounting bracket screws
(GG). Place the keyholes of the canopy (B) into the
screws (GG) and rotate clockwise.
Hardware Used
GG
Mounting Bracket
Screw
x 4
B
A
GG
1
2. Secure the canopy (B) with the previously removed
mounting bracket screws (GG) and securely tighten
all four screws (GG). Push the canopy cover (C) up
into the bottom of the canopy (B) until it is locked.
Note: Closemount installation will not have the downrod
(E) and canopy cover (C).
Hardware Used
GG
Mounting Bracket
Screw
x 4
B
C
GG
E
2
3. Place the blade bracket (F) onto the blade (H). Place
the blade medallion (G) into the three holes on the
opposite side of the blade (H). Secure the blade
bracket (F) and blade medallion (G) to the blade (H)
using the blade screws (BB). Repeat this step for the
remaining blades (H).
Hardware Used
BB
Blade Screw x 15
F
H
BB
G
3
Loading ...
Loading ...
Loading ...