Loading ...
Loading ...
Loading ...
English46
Installation instructions
Installation instructions
Installing the conduit
Remove the conduit connection plate from the rear of the drawer body and rotate it as
shown below.
The conduit hole (1⅛") must be used.
1⅛" 1⅜"
1⅛"1⅜"
1. Prepare the conduit cord shown in Figure 1.
2. Install the conduit cord as shown in Figure 2.
Conduit connection plate
Strain relief
Ring
Body
Figure 2
1"
3½"
⅜" 1"
3½"
3 wire 4 wire
Knockout surface
Figure 1
⅜"
For conduit installations, insert the strain relief (not included) into the conduit hole (1⅛").
Then thread the conduit cord through the body of the strain relief and fasten the ring.
Reinstall the bracket.
Loading ...
Loading ...
Loading ...