Loading ...
Loading ...
Loading ...
Washing Procedures
(continued)
Safety Lid Lock
9_
Start the washer.
Close the washer lid and pull out the cycle selector knob. Washer will fill and
agitate with the lid open The tub will not spin unless the lid is closed..
• To stop the washer, push in the cycle selector knob_
• Do not stop and restart washer during a spin when using the fabric softener
dispenser.
• To change acycle, push in the cycle selector' knob. Turn it clockwise to the
desired setting. Pull out the knob to restart the washer..
10.
Remove items when the cycle is completed.
For your safety, the lid locks when the tub is spinning. It will remain locked for
about 1 minute after the tub stops spinning.
• To open the lid dudng a spin, push in the cycle selector knob and wait about
1 minute for the lid lock to release Do not force open the locked lid.
Placewashed items in automatic dryer, line dry, or dry fiat as directed by fabric
care label. Excesswrinkling, color' transfer or odors may develop in items left
in the washer after the cycle has ended.
To avoid serious personal injury, do not operate washer if safety lid
lock is missing or damaged.
Stain Removal
Do not combine stain removal products.
Safe Stain Removal Procedures
To reduce the risk of fire or serious injury to persons or property,
comply with the basic warnings listed below:
• Read and comply with all instructions on stain removal products.
• Keep products in their original labeled containers and out of children's
reach,
° Thoroughly wash any utensil used
• Do not combine stain removal products, especially ammonia and chlorine
bleach. Dangerous fumes may result_
• Never wash items which have been previously cleaned in, washed in,
soaked in or spotted with gasoline, dry cleaning solvents or other flammable
or explosive substances because they give off vapors that could ignite or
explode.
. Never use highly flammable solvents, such as gasoline, inside the home,
Vapor's can explode on contact with flames or sparks.
Follow fabric care label instructions_
For successful stain removal:
• Remove stains promptly,.
• Determine the kind of stain, then follow recommended treatment in the
stain removal chart on the next page,
° To pretreat stains, use a prewash product, liquid detergent, or a paste
made from granular detergent and water.
• Use cold water on unknown stains because hot water can set stains.
. Check care label instructions for treatments to avoid on specific fabrics.
• Check for colorfastness by testing stain remover on an inside seam
• Rinse and wash items after stain removal
6
Loading ...
Loading ...
Loading ...