Marvel MPRE424IG81A 24 Inch Counter Depth Compact Refrigerator

User Manual - Page 11

For MPRE424IG81A.

PDF File Manual, 44 pages, Read Online | Download pdf file

MPRE424IG81A photo
Loading ...
Loading ...
Loading ...
INSTALLING THE ANTI TIP DEVICE
Step by step instructions for locating the po-
sition of the bracket:
1) Decide where you want to place the beverage center.

leaving 1" (2.5 cm) of clearance from the rear wall to allow
room for the anti-tip bracket.

¹
" (6 mm) to
allow engagement with the anti-tip bracket. Level the unit
by adjusting all the leveling legs as required. Turning the
leveling leg counterclockwise will raise the unit and clock-
wise will lower the unit.
3) Make sure the beverage center is in the desired loca-

cabinet where the anti-tip bracket will be installed. If the
installation does not allow marking the rear corner of the


beverage center out of the way. From the temporary line

1
2" (54.6 cm) as shown in
Figure 15.

the side of the bracket lines up with the side of the cabinet
mark, and the "V" notches on the anti-tip bracket line up
with the end of the 21
1
2" (54.6 cm) line (Rear of cabinet
line).

screw. (See Figure 15).
6) Slide the cabinet back into position, making sure the rear
cabinet leveling leg slides under the anti-tip bracket engag-
ing the slot.
Front of cabinet
Figure 14
21
1
2"
(54.6 cm)
Anti-Tip
Bracket
Leveling Leg
Bottom View of
Beverage
Center
Floor Mount Installation

or right rear corner of the wine cellar as shown in Figure 14.
!
WARNING
ALL APPLIANCES CAN TIP
RESULTING IN INJURY.
INSTALL THE ANTI-TIP
BRACKET PACKED WITH
THE APPLIANCE.
FOLLOW THE INSTRUC-
TIONS BELOW
!
CAUTION
NOTE

material to avoid damage when moving the unit.

required, (not included with the anti-tip kit).
Anti-Tip Device
!
WARNING
If your beverage center is not located under a counter
top (free standing), you must use an anti-tip device
installed as per these instructions. If the beverage
center is removed from its location for any reason,
make sure that the device is properly engaged with
the anti-tip bracket when you push the beverage
center back into the original location. If the device is
not properly engaged, there is a risk of the beverage
center tipping over, with the potential for property dam-
age or personal injury.
11
Loading ...
Loading ...
Loading ...