Loading ...
Loading ...
Loading ...
iMPORTANT:This unitis shippedwith theenginefullof oil. After
assembly,see page 10for fuel and oil details.
Removing From Carton
1. Cut the cornersof thecartonandlay the sidesflaton the ground.
Removeall packinginserts.
2. Movethe snowthrowerout of thecarton.
3. Makecertainthe carton has beencompletelyemptiedbefore
discardingit.
DO NOTlift the snowthrower bythechute handle.
Before Assembly
NOTE: Referenceto right,left, front or rearof the unit isfromthe
operatingposition,facingforward,unlessotherwisestated.
Setting Up The Handle
NOTE: Beawareof the three looselyfitted cabletiesattachedto the
lowerhandlethat will be utilizedlaterto securethe cables.
1. Loosenand removethe wing knob,saddlewasher,handletab and
carriagescrew on eachside of the lower handle.See Figure1.
2. Slidethe looselyfitted cabletie fromthe rightside of the lowerhandle up
to thecross memberof the lower handle.Leavethe secondcable tie in
placeon the rightside of the lowerhandle.See Figure3 for reference.
iMPORTANT: Itwill be necessaryto lift the upper handlewhilesliding up
thiscable tie to preventdamage to thecable.
3. Lift the upper handle up and position it over the lowerhandle,
aligning the holes where the wing knobs were removed (1). See
Figure 2.
Becarefulnot to bendor kinkthe cables.
4. Inserta carriagescrewfromthe outsidethrougha handletab,the
upperand lowerhandles,a saddlewasherandintothe wing knob
(2). Repeatonthe otherside.
5. Tightenthewing knobsoneach sideof the handle.Referto Figure
2.
NOTE:The augercable routesdownthe left lowerhandleandthe
drivecableis routedacrossthe top of the lowerhandleanddownthe
rightside of the lowerhandle.See Figure3.
.
Threecabletieshavebeen usedto looselytie the controlcables
to the lowerhandle,includingthe cabletie you relocatedin step2.
Positioncable tiesnow,as inFigure3, andtightento securecables
to the lowerhandle.Trimoffexcessmaterialof cableties.
f
Figure 1
Drive Cable
Figure 2
/
get Cable
_js jj
J
Figure 3
8
Loading ...
Loading ...
Loading ...