Loading ...
Loading ...
Loading ...
2
Getting Started
39
3 Connect the USB cable to the USB
power adapter.
4 Plug the USB power adapter into a
power outlet.
The status lamp of the camera turns on and
charging starts.
Depending on the battery level, the charg-
ing time differs. An exhausted battery will
be fully recharged in about 2.5 hours (at 25°C
(77°F)).
When charging is complete, the status lamp
turns off.
5 Remove the USB cable from the USB terminal, and close the
terminal cover.
Storage Capacity --------------------------------------------------------------------------------------------
•About 200 pictures can be taken when the battery is fully charged.
•This is based on tests conducted according to CIPA standards under the following conditions: At 23°C
(73°F) temperature; the monitor is on; a picture is taken every 30 seconds; the camera is turned off
and back on after 10 pictures are taken.
•The storage capacity is for reference. For long periods of use, it is recommended that you carry spare
batteries.
Caution -------------------------------------------------------------------------------------------------------
•Use only genuine rechargeable battery (DB-110).
•If the battery starts to run down more quickly even after being charged, the battery has reached the
end of its service life. In this case, replace the battery with a new one.
•The battery may become very hot immediately after operation. Turn the camera off and leave it to
cool down sufficiently before removing the battery.
•If you turn the camera on while charging the battery, the charging is interrupted.
Memo ---------------------------------------------------------------------------------------------------------
•You can also charge the battery by connecting the camera to a computer using the USB cable. (p.110)
•The battery can also be recharged with the optional battery charger BJ-11.
3
4
Loading ...
Loading ...
Loading ...