Loading ...
Loading ...
Loading ...
43
Notes:
• When turning off the power supply of cooktop, there will be no ‘hot surface’
indication, but the cooking zone may still be hot! Take extreme care.
• Heavy-duty scourers, some nylon scourers, and harsh/abrasive cleaning
agents may scratch the glass. Always read the label to check if your
cleaner or scourer is suitable.
• Never leave cleaning residue on the cooktop glass surface: the glass may
become stained
Boil over melts and hot/sugary spills on the glass
Remove these immediately with a fish slice, palette knife, or razor blade scraper
suitable for ceramic glass of cooktop, but beware of hot cooking zone surfaces:
1. Switch off the power supply.
2. Hold the blade or utensil at a 30° angle and scrape the soiling or spill to
a cool area of the cooktop.
3. Clean the soiling or spill up with a dish cloth or paper towel.
4. Follow steps 2 to 4 for ‘Everyday soiling on glass’ above.
Notes:
• Remove stains left by melts and sugary food or spillovers as soon as
possible. If left to cool on the glass, they may be difficult to remove or even
permanently damage the glass surface.
• Cut hazard: when the safety cover is retracted, the blade in a scraper is
razor-sharp. Use with extreme care and always store safely and out of reach
of children.
Spillovers on the touch controls
1. Switch off the power supply.
2. Soak up the spill
3. Wipe the touch control area with a clean damp sponge or cloth.
4. Wipe the area completely dry with a paper towel.
5. Switch on the power supply to the cooktop.
NOTE: The cooktop may beep and turn itself off, and the touch controls may
not function while there is liquid on them. Make sure you wipe the touch
control area dry before turning the cooktop back on.
Loading ...
Loading ...