Loading ...
Loading ...
Loading ...
12
Connecting the Cooktop to the Power Supply
The power supply should be connected in compliance with National Electric
Codes, as well as all state, municipal, and local codes. The supply must be from
an individual grounded circuit that is protected by a circuit breaker.
CAUTION: The appliance has a large power rating and must be connected to
electricity by a Qualified Electrician.
Notes:
• If the power cable is damaged or needs replacing, this should be done by
a technician using the proper tools, so as to avoid any accidents.
• If the appliance is being connected directly to the main power supply, an
omni polar circuit breaker must be installed with a minimum gap of 3mm
between the contacts.
• The installer must ensure that the correct electrical connection has been
made and that it complies with the proper local safety regulations.
• The power cable must not be bent or compressed.
• The power cable must be checked regularly and only replaced by
qualified technician.
Cautions:
1. The cooktop must be installed by qualified personnel or technicians. Do
not attempt to install the cooktop yourself.
2. The electric cooktop shall not be mounted to cooling equipment,
dishwashers, or rotary dryers.
3. The electric cooktop shall be installed such that better heat radiation can
be ensured to enhance its reliability.
4. Be sure the wall and the area above the cooktop are able to withstand any
residual heat created through use.
5. To avoid any damage, the sandwich layer and adhesive must be heat
resistant.
6. A steam cleaner is not to be used.
Loading ...
Loading ...
Loading ...