Web: www.breville.co.nzWeb: www.breville.com.au
Breville is a registered trademark of Breville Pty. Ltd. A.B.N. 98 000 092 928.
Copyright Breville Pty. Ltd. 2015.
Due to continued product improvement, the products illustrated/photographed
in this brochure may vary slightly from the actual product.
ANZ – C15
Australian Customers
Mail: Locked Bag 2000
Botany NSW 1455
AUSTRALIA
Phone: 1300 139 798
Fax: (02) 9700 1342
Email:
Customer Service:
askus@breville.com.au
New Zealand Customers
Mail: Private Bag 94411
Botany Manukau 2163
Auckland NEW ZEALAND
Phone:
0800 273 845
Fax: 0800 288 513
Email:
Customer Service:
askus@breville.co.nz
Breville Customer Service Centre
BodyZone
™
Fitted Heated Blanket
Instruction Book
2
BREVILLE
RECOMMENDS
SAFETY FIRST
At Breville, we believe that
safe performance is the first
priority in any consumer
product, so that you, our valued
customer can confidently use
and trust our products. We ask
that any electrical appliance
that you use be operated in a
sensible fashion with due care
and attention placed on the
following important operating
instructions.
IMPORTANT
SAFEGUARDS
READ ALL INSTRUCTIONS
BEFORE USE AND SAVE
FOR FUTURE REFERENCE
• Carefully read all instructions
before operating the BodyZone
by Breville heated blanket and
save for future reference.
• Remove any packaging
material and promotional
stickers before using the
heated blanket for the first time.
• Use the heated blanket only
with the detachable controller
supplied. Refer to the markings
on the heating unit or the table
on page 8 of this instruction
book, for the model number of
the controller.
• Connect only to 230V or 240V
power outlet.
• Use this blanket as an under
blanket only.
• Not recommended for futons
or similar folding bedding
systems.
• This blanket is not
recommended to be used on an
adjustable bed. If used on an
adjustable bed, check that the
blanket or cord cannot become
caught, creased, kinked or
damaged in any way.
2 Breville Recommends Safety First
8 Components
11 Functions
15 Care & Cleaning
Contents
3
• Make sure that the heating area
(wire element) on any side of
the bed does not hang over the
edge of the mattress and that
the following instructions are
read carefully before using the
blanket.
• Do not attempt to expose the
internal wires.
• Do not use this blanket with
an infant, an infirm person or
anyone insensitive to heat.
• Use only for human use, not for
pets.
• Overly extended application at
a high setting can result in skin
irritation or burns.
• Children under the age of three
are not to use this heating
blanket due to their inability to
react to overheating.
• The heated blanket is not to be
used by young children over
the age of three unless the
controls have been pre-set by
a parent or guardian, or unless
the child has been adequately
instructed on how to operate
the controls safely.
• Avoid sharp objects. Do not
insert pins or any sharp objects
into the heated blanket as they
may damage the electrical
wiring.
• Do not use folded, rucked or
rolled.
• Do not tuck in blanket itself
– only fitted skirt should be
tucked in under mattress.
• Do not use creased, folded or
damaged in any way.
• Keep control unit away from an
open window.
• Be sure that this blanket is
used only on an alternating
current supply circuit of correct
voltage.
• The flexible power supply cord
and controller must, as far as
practicable, be kept outside the
bed.
• Be sure that the heated blanket
is installed so that at all times
the flexible supply plug is
adjacent and accessible to the
main power outlet.
• Do not use the heated blanket
if it is wet.
• Switch off at the power outlet
and remove plug when this
blanket is not in actual use.
• This blanket must be kept in
the fully spread condition at
all times during use to avoid
overheating. It is imperative
that the blanket be frequently
inspected to ensure that this
condition is being maintained.
4
• Regularly inspect the heated
blanket, power supply cord,
plug and controller for any
wear, damage or misuse. If
signs of these are detected,
immediately cease use of the
appliance and return the entire
unit to your nearest Breville
Service Centre for examination,
replacement or repair.
• Bed clothes should not be
folded back when the blanket
is switched on. Do not leave
heavy objects on the bed when
the unit is switched on.
• Arrange the blanket so that the
heating wires are not beneath
pillows and/or bolsters.
• Person suffering from bed-
wetting should only use
product specifically designed
for this condition.
• The blanket must not be used
over or under a waterbed.
• If any abnormality or defect
in operation of this blanket
is observed, discontinue its
use immediately and consult
the manufacture or a licensed
electrician.
• It is recommended that a
qualified and registered person
inspect the heated blanket after
each 3 years of use.
• There are no customer
serviceable parts inside. The
heated blanket is fitted with a
specially designed controller
and no attempt should be
made to repair it or to replace
the protective fuse. Have the
heated blanket serviced only
by a qualified service agent at
your nearest Breville Service
Centre.
• When storing the heated
blanket, allow it to cool down
before folding.
• When storing, fold neatly,
but not tightly (or roll) in the
original packaging without
sharp bends in the heating
element and store where no
other objects will be placed
upon it.
• Do not dry clean this
blanket. Cleaning liquids
may have a deleterious
effect on the insulation
covering of the heating unit.
It is recommended to follow
instructions for localized
soiling or washing if soiling
occurs. Please refer to Care and
Maintenance instructions.
• This appliance is for domestic
use only. Not intended for
medical use in hospitals.
• Avoid pressing creases into the
heated blanket.
5
IMPORTANT
SAFEGUARDS
FOR ALL
ELECTRICAL
APPLIANCES
• Fully unwind the power cord
before use.
• Connect only to a 230V or
240V power outlet.
• Do not let the power cord hang
over the edge of a bench or
table, touch hot surfaces or
become knotted.
• To protect against electric
shock, do not immerse the
power cord, power plug or
appliance in water or any other
liquid or allow moisture to
come in contact with the part,
unless it is recommended in
the cleaning instructions.
• The appliance is not
intended for use by persons
(including children) with
reduced physical, sensory
or mental capabilities, or
lack of experience and
knowledge, unless they have
been given supervision or
instruction concerning use
of the appliance by a person
responsible for their safety.
• Children should be supervised
to ensure that they do not play
with the appliance.
• It is recommended to regularly
inspect the appliance. To
avoid a hazard, do not use the
appliance if power cord, power
plug or appliance becomes
damaged in any way. Return
the entire appliance to the
nearest authorised Breville
Service Centre for examination
and/or repair.
• Any maintenance other than
cleaning should be performed
at an authorised Breville
Service Centre.
• This appliance is for household
use only. Do not use this
appliance for anything other
than its intended use. Do not
use in moving vehicles or
boats. Do not use outdoors.
Misuse may cause injury.
• The installation of a residual
current device (safety switch)
is recommended to provide
additional safety protection
when using electrical
appliances. It is advisable that
a safety switch with a rated
residual operating current
not exceeding 30mA be
installed in the electrical circuit
supplying the appliance. See
your electrician for professional
advice.
6
• Always turn the appliance to
the OFF position, switch off at
the power outlet and unplug
at the power outlet when the
appliance is not in use.
• Before cleaning, always turn the
appliance to the OFF position,
switch off at the power outlet,
unplug at the power outlet
and remove the power cord, if
detachable, from the appliance
and allow all parts to cool.
• Do not place this appliance on
or near a heat source, such as
hot plate, oven or heaters.
• Position the appliance at a
minimum distance of 20cm
away from walls, curtains and
other heat or steam sensitive
materials and provide adequate
space above and on all sides for
air circulation.
7
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
8
Components
Breville BodyZone Fitted Heated Blanket
range includes the following models:
BodyZone Antibacterial Heated Blanket
Model Mattress Size WxL (approx) Removable Cover Skirt Size
BZB417WHT Single / King Single 1050 x 2000mm No cover 400mm
BZB427WHT Double 1380 x 1870mm No cover 450mm
BZB437WHT Queen 1520 x 2000mm No cover 450mm
BZB457WHT King 1780 x 2000mm No cover 450mm
BZB467WHT Super King 2000 x 2000mm No cover 450mm
BodyZone Antibacterial Heated Blanket with Removable Quilted Cover
Model Mattress Size WxL (approx) Removable Cover Skirt Size
BZB517WHT Single / King Single 1050 x 2000mm Quilted cover 400mm
BZB527WHT Double 1380 x 1870mm Quilted cover 450mm
BZB537WHT Queen 1520 x 2000mm Quilted cover 450mm
BZB557WHT King 1780 x 2000mm Quilted cover 450mm
BZB567WHT Super King 2000 x 2000mm Quilted cover 450mm
BodyZone Antibacterial Heated Blanket with Removable Fleecy Cover
Model Mattress Size WxL (approx) Removable Cover Skirt Size
BZB617WHT Single / King Single 1050 x 2000mm Fleecy cover 400mm
BZB627WHT Double 1380 x 1870mm Fleecy cover 450mm
BZB637WHT Queen 1520 x 2000mm Fleecy cover 450mm
BZB657WHT King 1780 x 2000mm Fleecy cover 450mm
BZB667WHT Super King 2000 x 2000mm Fleecy cover 450mm
BodyZone Controllers
Model Suits
CTL153 For all Double and Queen models
CTL154 For all Single/King Single, King and Super King models
9
C
A
B
A. Machine-washable, antibacterial
heated blanket
B. Fully fitted design with skirt
C. Removable cover (if applicable)
for added comfort and mattress
protection easily snap-fastens to
the heated blanket and is simple to
remove for cleaning:
a) Fleecy cover
b) Quilted cotton cover
Not Shown:
• Flexible heating wire
• Safety overheat protection
• Reusable poly bag: ideal for storing
the heated blanket and controller
when not in use
Fleecy Quilted
BODYZONE ANTIBACTERIAL BLANKET
10
BODYZONE CONTROLLER
D. Detachable controller: dual controllers
for all Double/Queen/King/Super King
models
E. BodyZone heat technology: provides
individual heat settings for both your upper
and lower body for ultimate comfort control
F. LCD screen: illuminates when
programming settings and dims when set
G. 6 heat settings: allows you to choose a
different comfort heat setting for both upper
and lower body
H. Auto-off timer: can be pre-programmed
to turn the blanket off after a set number
of hours
I. Choice of Manual or Auto setting:
a) Manual setting: to select body zone
heat settings and auto-off time
b) Auto setting: Remembers the last heat
and auto-off settings programmed
J. Controller socket attached to the heated
blanket: dual sockets for all Double/
Queen/King/Super King models
K. Controller plug: attaches to the controller
socket and is easy to remove for storing
D
E
J
K
G
I
H
F
11
Functions
BEFORE FIRST USE
Remove any promotional material and
packaging from the heated blanket.
SECURING YOUR FITTED HEATED
BLANKET
Unfold the heated blanket and lay it flat on
the mattress, ensuring that the skirt is aligned
with the corresponding edges. Ensure that the
controller socket(s) is facing up and positioned
at the top end of the mattress.
Ensure that the heating wire section on the
blankets is clear of the pillow and does not
hang over the sides of the mattress.
Pull the elastic inside the fitted skirt over the
ends of the mattress. Ensure to pull the middle
of the blanket so that it is evenly stretched and
distributed over the entire mattress, ensuring
there are no creases or rucking.
NOTE
The heated blanket must not be wider than
the mattress with which it is to be used. It is
normal for a small section of the fitted skirt to
be showing on top of a larger sized mattress.
No heating wire must be trapped or tucked
into any part of the bed. The heating wire
should not hang over the sides of the mattress.
Ensure the elastic of the blanket skirt is
completely under the entire mattress and
secure.
When fitted to the mattress correctly, the
controller socket(s) should be positioned at
the top end of the mattress, near occupants
shoulder area.
NOTE
Ensure that the blankets is stretched
completely flat when placed on the mattress
and creases or rucking is not evident.
CAUTION
No heating wire must be trapped or tucked
into any part of the bed.
Ensure that when the blanket is fitted onto the
mattress the controller(s) and flexible power
supply cord are outside of the bed coverings
and located in a position that will prevent
accidental damage to the housing and cords.
Use this blanket as an under blanket and do
not use above the occupant of the bed.
12
FITTING THE REMOVABLE COVERS
(ONLY AVAILABLE ON DESIGNATED MODELS)
Ensure the heated blanket is correctly fitted to
the mattress before fitting the removable cover
(if applicable).
When fixing the removable cover to the heated
blanket, ensure the fleecy or quilted cover is
facing upwards with the studs facing down.
Secure the removable cover to the heated
blanket using the studs provided. Ensure that
all studs are fastened to prevent the cover from
moving.
No other cover other than that supplied with
the blanket should be used with the heated
blanket.
TO CONNECT THE CONTROLLER/S
Ensure the heated blanket controller is in the
‘OFF’ position and not connected to the power
outlet.
To connect your controller, insert the controller
plug into the controller socket on the heated
blanket.
Ensure that the plug is securely fastened in
the socket so that the locking clips are fully
inserted and no gap between the plug and
socket, as per picture below.
NOTE
The controller plug is designed to only fit the
socket correctly one way – if the plug does not
push in fully, turn the plug around.
TO DETACH THE CONTROLLER/S
Ensure the heated blanket controller is in the
‘OFF’ position and disconnect from the power
outlet.
Push the locking clips on the controller plug
together to release and withdraw the plug from
the controller socket.
13
STORING YOUR CONTROL UNIT
Remove the controller(s) when laundering
your blanket. Store your controller(s) during
summer months while your blanket remains on
the bed as a comfortable under blanket.
DUAL CONTROL UNITS
Your Double/Queen/King/Super King size
heated blankets features two controllers for
individual left and right side heating comfort.
OPERATING YOUR HEATED BLANKET
Your BodyZone by Breville heated blanket has
dual zone heating technology that allows you
to choose from 6 heat settings for your upper
and lower body and an auto-off timer which
allows you to pre-program the blanket to turn
off after a set number of hours (up to 9hrs).
Ensure the heated blanket controller(s) is
switched to the ‘OFF’ position. Connect the
controller to the blanket. Plug the cord into a
230V or 240V power outlet and switch the
power on. Slide the control switch to either the
‘MANUAL’ or ‘AUTO’ function.
The LCD screen illuminates when initially
switched on and when programming the heat
and timer settings for easier visibility, but will
dim after 10 seconds of inactivity.
NOTE
On initial use, it is recommended that the
blanket be set on highest setting (6,6) for 3
hours before sleeping on the bed. This will
assist in drying out any moisture which has
been accumulated in the mattress.
USING THE MANUAL SETTING
Slide the control switch down from ‘OFF’ to
‘MANUAL’. The LCD screen will illuminate
showing the default settings (1,1) and auto shut
off timer of 4 hours.
1
1
4
SELECTING A HEAT SETTING
The BodyZone heated blankets have a heat
setting range of 0 to 6 for each zone. This is
displayed on the left hand side of the LCD
display.
Press the ‘HEAT’ button; the upper body of
the icon will start flashing, indicating that the
temperature is being adjusted for this zone of
the heated blanket.
3
1
4
Press the '+' and '-' buttons until the desired
temperature setting is reached for this zone,
then press ‘ENTER’ to confirm this setting.
14
To select the heat setting for the lower body,
press the ‘HEAT’ button twice; until the lower
body icon flashes.
3
5
4
Press the '+' and '-' buttons until the desired
temperature setting is reached for this zone ,
then press ‘ENTER’ to confirm this setting.
Once the heat setting is confirmed the blanket
will start heating.
SETTING THE AUTO-OFF TIMER
BodyZone heated blankets have a
programmable auto-off feature. This timer
can be programmed from 1 to 9 hours to
automatically turn the heated blanket off. This
is displayed on the right hand side of the LCD
screen.
NOTE
The auto-off function, either programmed or
after 9 hours, will only turn the blanket off (no
heat). The controller will remain in standby
until manually switched to the 'OFF' position.
Press the ‘TIMER’ button; the number of hours
will then flash.
Press the '+' and '-' buttons until the desired
number of operating hours is reached, then
press ‘ENTER’ to confirm.
3
5
5
USING THE AUTO SETTING
The AUTO setting on the BodyZone heated
blanket acts as a memory or favourites
function. To program the auto setting, slide
the control switch up from 'OFF' to 'AUTO',
then follow the previous instructions for using
the controller on the ‘MANUAL’ setting. The
heated blanket can then be switched off at the
controller.
When next used, slide the control switch
up from ‘OFF’ to ‘AUTO’. The LCD screen
will illuminate and display the last manually
programmed heat and auto-off settings.
NOTE
It is not recommended that you sleep with the
heated blanket switched on. Should you choose
to leave your blanket on all night, however, the
lowest heat setting (1,1) should be used.
WHEN NOT IN USE
When the blanket is not in use, slide the control
switch to 'OFF' and unplug the power supply
cord for the power outlet.
15
Care & Cleaning
DO NOT dry clean.
DO NOT iron.
Use only the following instructions when
cleaning the heated blanket:
Before cleaning, ensure that the controller
is unplugged from the power supply and
detached from the blanket.
SPOT CLEANING
• Sponge the affected area using a lukewarm
neutral detergent or mild soapy solution.
• Follow this with a sponging action using a
clean water solution.
• Remove any excess water by compressing the
wet area between absorbent towels.
HAND WASHING
• Immerse the heated blanket with controller(s)
removed in a soapy solution of lukewarm
water and mild, neutral detergent.
• Soak for five minutes then gently squeeze the
solution through the blanket.
• Rinse thoroughly in clean, lukewarm water,
then gently squeeze any excess water from
the heated blanket.
WARNING
The controller MUST be removed from the
blanket when washing. Never immerse the
detachable controller in water or any other
liquid.
MACHINE WASHING
The heated blanket can be washed in a
domestic washing machine (size permitting) or
by a commercial laundry.
• When washing in a domestic washing
machine, wash on the WOOL or DELICATES
setting using a neutral detergent or mild
soapy solution.
• DO NOT wash on a HOT cycle;
the temperature must be kept below 30˚C.
• DO NOT use high speed or extra spin cycles.
• DO NOT machine wash with the controller(s)
connected to the blanket.
AIR DRYING
• Drape the heated blanket across a clothes
line and drip dry.
• DO NOT use pegs to secure the heated
blanket in position
• DO NOT Dry with a hair dryer or heater.
• DO NOT twist or wring dry.
• DO NOT tumble dry the electric blanket as it
may damage the internal heating wires.
• DO NOT use moth balls or sprays.
WARNING
DO NOT use the heated blanket if it is wet.
16
WASHING THE REMOVABLE COVER
If the heated blanket has a removable quilted
or fleecy cover, it can be removed and washed
separately.
Once removed from the heated blanket, the
cover can either be hand washed or machine-
washed following the same instructions as for
washing the heated blanket.
MACHINE WASHING
The cover can also be washed in a domestic
washing machine (size permitting) or by a
commercial laundry.
• To wash the cover in a washing machine,
wash on the WOOL or DELICATES setting
using a neutral detergent or mild soapy
solution.
• Once washed, ensure to stretch the cover
into its original shape whilst damp to prevent
distortion during drying.
• Dry naturally by draping over a clothes lines
or tumble dry on a LOW setting only.
• DO NOT iron
• DO NOT wash on a hot cycle,
the temperature must be kept below 30˚C
• DO NOT use high speed or extra spin cycles.
STORAGE
When not in use, pack the heated blanket in its
original packaging for protection and store in a
cool, clean and dry location.
Avoid pressing sharp crease into the blanket
and store where no objects will be placed
upon it.
It is recommended that during the summer
months or when the blanket is not in use
for extended periods of time, remove the
controller/s and store whilst leaving the heated
blanket on the bed as a comfortable under
blanket.
17
NOTES
18
NOTES
19
NOTES
