Model BBL600XL /C Issue B11 Packaging Code: AM / CN
Breville is a registered trademark of Breville Pty. Ltd.
Breville Customer Service Center
US Customers
19400 South Western Avenue
Torrance
CA 90501
Service Center: 1 (866) BREVILLE
Email askus@brevilleUSA.com
www.breville.com
Canada Customers
Anglo Canadian
2555, De L’ Aviation
Pointe-Claire (Montréal) Québec
H9P 2Z2
Service Center: 1 (866) BREVILLE
Fax (514) 683-5554
Email askus@breville.ca
www.breville.com
© Copyright. Breville Pty. Ltd. 2011
Due to continual improvements in design or otherwise, the product you
purchase may differ slightly from the one illustrated in this booklet.
ikon Hemisphere
™
LCD Blender
Model BBL600XL /C
BBL600XL_IB_OBC_OFC.pdf 1 17/03/11 9:48 AM
Congratulations
on the purchase of your new Breville ikon Hemisphere™ LCD Blender
Contents
Page
Breville recommends safety first 4
Know your Breville ikon Hemisphere
TM
LCD Blender 5
Why is the Breville ikon Hemisphere
TM
LCD Blender superior? 6
Operating your Breville ikon Hemisphere
TM
LCD Blender 7
Care and Cleaning 13
Tips on how to use your Breville ikon Hemisphere
TM
LCD Blender 14
Suggested uses for your Breville ikon Hemisphere
TM
LCD Blender 16
Ice making capabilities of you Breville ikon Hemisphere
TM
LCD Blender 17
Troubleshooting 18
Warranty 19
French 24
2
BBL600XL_IB_p2-p3.pdf 1 15/03/11 9:54 AM
Congratulations
on the purchase of your new Breville ikon Hemisphere™ LCD Blender
Contents
Page
Breville recommends safety first 4
Know your Breville ikon Hemisphere
TM
LCD Blender 5
Why is the Breville ikon Hemisphere
TM
LCD Blender superior? 6
Operating your Breville ikon Hemisphere
TM
LCD Blender 7
Care and Cleaning 13
Tips on how to use your Breville ikon Hemisphere
TM
LCD Blender 14
Suggested uses for your Breville ikon Hemisphere
TM
LCD Blender 16
Ice making capabilities of you Breville ikon Hemisphere
TM
LCD Blender 17
Troubleshooting 18
Warranty 19
French 24
2
BBL600XL_IB_p2-p3.pdf 1 15/03/11 9:54 AM
Know your Breville ikon Hemisphere
TM
LCD Blender
5
Breville recommends safety first
IMPORTANT SAFEGUARDS
We at Breville are very safety conscious. We design and manufacture consumer products with the safety of you,
our valued customer, foremost in mind. In addition, we ask that you exercise a degree of care when using any
electrical appliance and adhere to the following precautions:
IMPORTANT SAFEGUARDS FOR YOUR
BREVILLE iKON HEMISPHERE
TM
LCD BLENDER
• Read all instructions.
• To protect against electrical shock, do not
immerse cord, plug or motor base in water or
any other liquid.
• Always use the appliance on a dry, level surface.
• The use of attachment not sold or recommended
by the manufacturer may cause fire, electric shock
or injury.
• Do not remove the blender pitcher from the motor
base while blender is in operation.
• Do not place hands in the pitcher unless the unit is
disconnected from the power outlet. A scraper
maybe used but must be used only when the
blender is not running.
• Disconnect the blender from the power outlet
before removing pitcher from base. Blades are
sharp - handle carefully.
• To reduce risk of injury, never place blade
assembly on base without jar properly attached.
• Always
operate blender with cover in place.
• Do not use this blender for any purpose other than
food or beverage preparation.
• Do not blend a dry, thick or heavy mixture for more
than 10 seconds without turning the blender off.
Then, stir ingredients before continuing to blend.
• Do not process boiling liquids. Let cool before
placing in pitcher.
• Do not leave the appliance unattended when in
use. Young children should be supervised when
near the appliance.
• Do not allow cord to hang over the edge of a table
or counter, touch hot surfaces, or become knotted.
• Do not place appliance on or near a hot gas
or electric burner, or where it could touch any other
source of heat.
• Unplug appliance from the power outlet when not
is use, before putting on or taking off parts, and
before cleaning.
• This appliance is for household use only. Do not
use this appliance for anything other than its
intended use. Do not use outdoors.
• This appliance has a polarized plug. To reduce the
risk of electric shock, this plug will fit in a polarized
outlet only one way. If the plug does not fit fully into
the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician. Do not modify the
plug in any way.
• Any maintenance other than cleaning should be
performed at an authorized Breville Service Center.
4
SAVE THESE INSTRUCTIONS
Pre-programmed ‘Ice Crush’
and ‘Smoothie’ settings
automatically alter speeds to
optimize blending results, then
switch off automatically.
Heavy duty die-cast metal base
for long lasting,
professional performance.
Large 51oz (1.5 liter) glass pitcher
unique dual ribs continually pass
ingredients onto the blades for
perfectly blended results.
Illuminated buttons
for clarity make reading easier.
Heavy duty, commercial grade
components for durability
Inner measuring lid
for adding ingredients while blending.
Electronic 5 speed
control plus pulse
electronic controls
ensure that the RPM
speed is maintained
for consistent results
every time.
Breville Assist™ lid
unique ring pull design ensures the
lid is easy to remove yet sealed
tight during operation.
Hemisphere™ Blade System
1
Blade removal
one twist and the blades
are easily removed for
fast and easy cleaning.
Cord storage
Non skid feet
LCD display
counts up on speed settings
and down for pre-programmed
settings for complete control
when blending.
Stainless steel blades
extra wide blades are
contoured to the base of
the jug so there are
no food traps.
BBL600XL_IB_p4-p5.pdf 1 15/03/11 9:57 AM
Know your Breville ikon Hemisphere
TM
LCD Blender
5
Breville recommends safety first
IMPORTANT SAFEGUARDS
We at Breville are very safety conscious. We design and manufacture consumer products with the safety of you,
our valued customer, foremost in mind. In addition, we ask that you exercise a degree of care when using any
electrical appliance and adhere to the following precautions:
IMPORTANT SAFEGUARDS FOR YOUR
BREVILLE iKON HEMISPHERE
TM
LCD BLENDER
• Read all instructions.
• To protect against electrical shock, do not
immerse cord, plug or motor base in water or
any other liquid.
• Always use the appliance on a dry, level surface.
• The use of attachment not sold or recommended
by the manufacturer may cause fire, electric shock
or injury.
• Do not remove the blender pitcher from the motor
base while blender is in operation.
• Do not place hands in the pitcher unless the unit is
disconnected from the power outlet. A scraper
maybe used but must be used only when the
blender is not running.
• Disconnect the blender from the power outlet
before removing pitcher from base. Blades are
sharp - handle carefully.
• To reduce risk of injury, never place blade
assembly on base without jar properly attached.
• Always
operate blender with cover in place.
• Do not use this blender for any purpose other than
food or beverage preparation.
• Do not blend a dry, thick or heavy mixture for more
than 10 seconds without turning the blender off.
Then, stir ingredients before continuing to blend.
• Do not process boiling liquids. Let cool before
placing in pitcher.
• Do not leave the appliance unattended when in
use. Young children should be supervised when
near the appliance.
• Do not allow cord to hang over the edge of a table
or counter, touch hot surfaces, or become knotted.
• Do not place appliance on or near a hot gas
or electric burner, or where it could touch any other
source of heat.
• Unplug appliance from the power outlet when not
is use, before putting on or taking off parts, and
before cleaning.
• This appliance is for household use only. Do not
use this appliance for anything other than its
intended use. Do not use outdoors.
• This appliance has a polarized plug. To reduce the
risk of electric shock, this plug will fit in a polarized
outlet only one way. If the plug does not fit fully into
the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician. Do not modify the
plug in any way.
• Any maintenance other than cleaning should be
performed at an authorized Breville Service Center.
4
SAVE THESE INSTRUCTIONS
Pre-programmed ‘Ice Crush’
and ‘Smoothie’ settings
automatically alter speeds to
optimize blending results, then
switch off automatically.
Heavy duty die-cast metal base
for long lasting,
professional performance.
Large 51oz (1.5 liter) glass pitcher
unique dual ribs continually pass
ingredients onto the blades for
perfectly blended results.
Illuminated buttons
for clarity make reading easier.
Heavy duty, commercial grade
components for durability
Inner measuring lid
for adding ingredients while blending.
Electronic 5 speed
control plus pulse
electronic controls
ensure that the RPM
speed is maintained
for consistent results
every time.
Breville Assist™ lid
unique ring pull design ensures the
lid is easy to remove yet sealed
tight during operation.
Hemisphere™ Blade System
1
Blade removal
one twist and the blades
are easily removed for
fast and easy cleaning.
Cord storage
Non skid feet
LCD display
counts up on speed settings
and down for pre-programmed
settings for complete control
when blending.
Stainless steel blades
extra wide blades are
contoured to the base of
the jug so there are
no food traps.
BBL600XL_IB_p4-p5.pdf 1 15/03/11 9:57 AM
Operating your Breville ikon Hemisphere
TM
LCD Blender
7
Why is the Breville ikon Hemisphere
TM
Blender superior?
6
What makes this blender superior?
The secret to the Hemisphere™ Blade is the
continuous movement created inside the pitcher. It
allows the Breville ikon Hemisphere
TM
LCD Blender to
combine the functions of a blender with a mini food
processor for the ultimate in versatility.
Combined with a powerful motor and heavy duty
commercial grade components, the Breville ikon
Hemisphere
TM
LCD Blender is built for durability,
reliability and professional results superior to
all other blenders.
Before first use
Before using your Breville ikon Hemisphere
TM
LCD
Blender for the first time, remove any packaging
material and promotional labels. Make sure the
appliance is switched off at the power outlet and the
power cord is unplugged. Wash the lid, inner lid
blender pitcher and blade assembly (refer to
Disassembling the blender pitcher on Page 11) of the
Breville ikon Hemisphere
TM
LCD Blender in warm, soapy
water with a soft cloth. Rinse and dry thoroughly. You
may opt to wash the parts in the top shelf of any
di
shwasher and the pitcher in the base section of the
dishwasher. The motor base can be wiped with a damp
cloth. Dry thoroughly.
• When using your Breville ikon Hemisphere
TM
LCD Blender for the first time, you may notice an
odor coming from the motor. This is normal
and will dissipate with use.
• The blending blades are extremely sharp. Avoid
any contact with fingers and hands.
Note
Step 2.
Step 3.
Turn the blender pitcher upright and insert onto
the motor base. The handle of the blender pitcher
can be positioned to the left or right hand side of
the appliance.
Step 4.
Add food or liquid into the blender pitcher ensuring
not to exceed the ‘MAX’ mark. Place the blender lid
firmly into position on the top of the blender pitcher.
Insert the clear inner lid into the blender lid and turn
clockwise to lock into position. (see Fig 1)
Fig 1
To reassemble ensure the lower part of
the Blade Holder is clipped into place by aligning the
parts and squeezing together at the edges until they
snap together, and then replace the silicon seal onto
the blade assembly with the raised rim of the
Removable Silicone Gasket facing downward. Place
the Gasket onto the Blade Assembly and push down
until it clicks into place. You should be able to read
THIS WAY UP on the gasket. (see Page 12 - Fig 1).
You will notice 2 notches on the blade assembly
(see pg 11- Fig 1). Place these notches into the 2
slots on the bottom of the jug (see 12 Fig 2). Twist
the Blade Removal System counterclockwise in the
direction of the indicator symbol until firmly locked
into position.
Assembling and attaching the blender
Step 1.
Place the motor base on a flat, dry surface such as a
table top. Make sure that the motor base is turned off
at the power outlet and the power cord is unplugged.
Motor overload protection
Your blender is equipped with motor overload
protection.
If your blender is overloaded the motor will stop and
the "Overload Protection" warning on the LCD will
start to flash.
Please do not attempt to use the blender while the
“Overload Protection” warning is flashing.
Once the warning stops flashing the blender has
cooled sufficiently and is ready to use again.
Re-select the desired speed or function button. If you
have turned the blender off you will need to switch it
back on, wait for the flashing to stop then re-select
the desired speed or function.
We recommend removing a portion of the mixture,
cutting food into smaller pieces of even size and/or
processing a smaller amount per batch.
BBL600XL_IB_p6-p7.pdf 1 15/03/11 2:56 PM
Operating your Breville ikon Hemisphere
TM
LCD Blender
7
Why is the Breville ikon Hemisphere
TM
Blender superior?
6
What makes this blender superior?
The secret to the Hemisphere™ Blade is the
continuous movement created inside the pitcher. It
allows the Breville ikon Hemisphere
TM
LCD Blender to
combine the functions of a blender with a mini food
processor for the ultimate in versatility.
Combined with a powerful motor and heavy duty
commercial grade components, the Breville ikon
Hemisphere
TM
LCD Blender is built for durability,
reliability and professional results superior to
all other blenders.
Before first use
Before using your Breville ikon Hemisphere
TM
LCD
Blender for the first time, remove any packaging
material and promotional labels. Make sure the
appliance is switched off at the power outlet and the
power cord is unplugged. Wash the lid, inner lid
blender pitcher and blade assembly (refer to
Disassembling the blender pitcher on Page 11) of the
Breville ikon Hemisphere
TM
LCD Blender in warm, soapy
water with a soft cloth. Rinse and dry thoroughly. You
may opt to wash the parts in the top shelf of any
di
shwasher and the pitcher in the base section of the
dishwasher. The motor base can be wiped with a damp
cloth. Dry thoroughly.
• When using your Breville ikon Hemisphere
TM
LCD Blender for the first time, you may notice an
odor coming from the motor. This is normal
and will dissipate with use.
• The blending blades are extremely sharp. Avoid
any contact with fingers and hands.
Note
Step 2.
Step 3.
Turn the blender pitcher upright and insert onto
the motor base. The handle of the blender pitcher
can be positioned to the left or right hand side of
the appliance.
Step 4.
Add food or liquid into the blender pitcher ensuring
not to exceed the ‘MAX’ mark. Place the blender lid
firmly into position on the top of the blender pitcher.
Insert the clear inner lid into the blender lid and turn
clockwise to lock into position. (see Fig 1)
Fig 1
To reassemble ensure the lower part of
the Blade Holder is clipped into place by aligning the
parts and squeezing together at the edges until they
snap together, and then replace the silicon seal onto
the blade assembly with the raised rim of the
Removable Silicone Gasket facing downward. Place
the Gasket onto the Blade Assembly and push down
until it clicks into place. You should be able to read
THIS WAY UP on the gasket. (see Page 12 - Fig 1).
You will notice 2 notches on the blade assembly
(see pg 11- Fig 1). Place these notches into the 2
slots on the bottom of the jug (see 12 Fig 2). Twist
the Blade Removal System counterclockwise in the
direction of the indicator symbol until firmly locked
into position.
Assembling and attaching the blender
Step 1.
Place the motor base on a flat, dry surface such as a
table top. Make sure that the motor base is turned off
at the power outlet and the power cord is unplugged.
Motor overload protection
Your blender is equipped with motor overload
protection.
If your blender is overloaded the motor will stop and
the "Overload Protection" warning on the LCD will
start to flash.
Please do not attempt to use the blender while the
“Overload Protection” warning is flashing.
Once the warning stops flashing the blender has
cooled sufficiently and is ready to use again.
Re-select the desired speed or function button. If you
have turned the blender off you will need to switch it
back on, wait for the flashing to stop then re-select
the desired speed or function.
We recommend removing a portion of the mixture,
cutting food into smaller pieces of even size and/or
processing a smaller amount per batch.
BBL600XL_IB_p6-p7.pdf 1 15/03/11 2:56 PM
9
Step 8.
When 60 seconds is reached, the blender will
automatically cease to operate and the selected
speed button and ‘Stop’ button illumination will go
out. The ‘Power’ button will illuminate and flash.
After a few seconds the LCD timer screen will
revert to ‘00’.
• The Breville ikon Hemisphere
TM
LCD Blender
will automatically stop blending after 60
seconds. This is a safety feature.
• To stop blending at any time, press the ‘Stop’
button or the selected speed button. The
‘Power’ button can also be pressed, but this
will also turn the appliance off and all
illuminations will go out.
• The speed can be changed at any time during
the blending process. Each time a new speed
is selected its button will illuminate and the
previous speed button illumination will go out.
The number of seconds on the LCD timer
screen is not interrupted and will continue to
count upwards to 60 seconds unless interrupted.
Note
Step 9.
The Breville ikon Hemisphere
TM
LCD Blender features two
additional functions, ‘ICE CRUSH’ and ‘SMOOTHIE’.
These are pre-programmed cycles which automatically
adjust the blending time and speeds to optimize
blending results. Select the required function by
pressing the corresponding function button. The blender
will start to operate and the selected function button
will illuminate. The ‘Power’ button will illuminate and
cease to flash.The ‘Stop’ button will illuminate and
flash. The LCD timer screen will start counting down in
one second increments until ‘00’ is displayed.
When ‘00’ seconds is reached, the blender will
automatically cease to operate and the function button
an
d ‘Stop’ button illumination will go out.The ‘Power’
button will illuminate and flash.
• To stop blending at any time, press the ‘Stop’
button or the selected function button. The
‘Power’ button can also be pressed, but this
will also turn the appliance off and all
illuminations will go out.
• The maximum amount of ice cubes the
blender can blend at any one time is 1
standard ice tray or 9 oz.
Note
Operating your Breville ikon
Hemisphere
TM
LCD Blender
continued
The Breville ikon Hemisphere
TM
LCD Blender
features a patented assist lid. This allows the lid
to fit tightly onto the blender pitcher, avoiding
displacement during operation. The ring pull
design allows the user to easily remove the lid
with a simple leverage action. (See Fig 1)
Note
Step 5.
Plug the power cord into a 110 / 120V power outlet.
Step 6.
Press the ‘Power’ button on the far left of the control
panel to turn the blender on. The ‘Power’ button will
illuminate and flash. The LCD timer screen will
illuminate with ‘00’ displayed.
Do not fill the blender pitcher above the ‘MAX’
line. When the blender pitcher is filled at or near
the ‘MAX’ line place one hand on the blender lid
to avoid displacement of the lid during operation.
Note
Step 7.
Select the required speed (1 to 5) by pressing the
corresponding speed button. The blender will start to
operate and the selected speed button will illuminate.
The ‘Power’ button will illuminate and cease to flash.
The ‘Stop’ button will illuminate and flash. The LCD
timer screen will start counting upwards in one
second increments until 60 seconds is reached.
Operate the blender only for the appropriate
amount of time required – do not over process.
Note
8
NEVER PLACE ANYTHING OTHER THAN FOOD AND LIQUIDS IN THE IKON HEMISPHERE™
LCD Blender WHILE THE MOTOR IS RUNNING.
Fig 1
BBL600XL_IB_p8-p9.pdf 1 15/03/11 10:17 AM
9
Step 8.
When 60 seconds is reached, the blender will
automatically cease to operate and the selected
speed button and ‘Stop’ button illumination will go
out. The ‘Power’ button will illuminate and flash.
After a few seconds the LCD timer screen will
revert to ‘00’.
• The Breville ikon Hemisphere
TM
LCD Blender
will automatically stop blending after 60
seconds. This is a safety feature.
• To stop blending at any time, press the ‘Stop’
button or the selected speed button. The
‘Power’ button can also be pressed, but this
will also turn the appliance off and all
illuminations will go out.
• The speed can be changed at any time during
the blending process. Each time a new speed
is selected its button will illuminate and the
previous speed button illumination will go out.
The number of seconds on the LCD timer
screen is not interrupted and will continue to
count upwards to 60 seconds unless interrupted.
Note
Step 9.
The Breville ikon Hemisphere
TM
LCD Blender features two
additional functions, ‘ICE CRUSH’ and ‘SMOOTHIE’.
These are pre-programmed cycles which automatically
adjust the blending time and speeds to optimize
blending results. Select the required function by
pressing the corresponding function button. The blender
will start to operate and the selected function button
will illuminate. The ‘Power’ button will illuminate and
cease to flash.The ‘Stop’ button will illuminate and
flash. The LCD timer screen will start counting down in
one second increments until ‘00’ is displayed.
When ‘00’ seconds is reached, the blender will
automatically cease to operate and the function button
an
d ‘Stop’ button illumination will go out.The ‘Power’
button will illuminate and flash.
• To stop blending at any time, press the ‘Stop’
button or the selected function button. The
‘Power’ button can also be pressed, but this
will also turn the appliance off and all
illuminations will go out.
• The maximum amount of ice cubes the
blender can blend at any one time is 1
standard ice tray or 9 oz.
Note
Operating your Breville ikon
Hemisphere
TM
LCD Blender
continued
The Breville ikon Hemisphere
TM
LCD Blender
features a patented assist lid. This allows the lid
to fit tightly onto the blender pitcher, avoiding
displacement during operation. The ring pull
design allows the user to easily remove the lid
with a simple leverage action. (See Fig 1)
Note
Step 5.
Plug the power cord into a 110 / 120V power outlet.
Step 6.
Press the ‘Power’ button on the far left of the control
panel to turn the blender on. The ‘Power’ button will
illuminate and flash. The LCD timer screen will
illuminate with ‘00’ displayed.
Do not fill the blender pitcher above the ‘MAX’
line. When the blender pitcher is filled at or near
the ‘MAX’ line place one hand on the blender lid
to avoid displacement of the lid during operation.
Note
Step 7.
Select the required speed (1 to 5) by pressing the
corresponding speed button. The blender will start to
operate and the selected speed button will illuminate.
The ‘Power’ button will illuminate and cease to flash.
The ‘Stop’ button will illuminate and flash. The LCD
timer screen will start counting upwards in one
second increments until 60 seconds is reached.
Operate the blender only for the appropriate
amount of time required – do not over process.
Note
8
NEVER PLACE ANYTHING OTHER THAN FOOD AND LIQUIDS IN THE IKON HEMISPHERE™
LCD Blender WHILE THE MOTOR IS RUNNING.
Fig 1
BBL600XL_IB_p8-p9.pdf 1 15/03/11 10:17 AM
11
Disassembling your blender for cleaning,
care and storage
Step 1.
Always make sure the Breville ikon Hemisphere
TM
LCD Blender is off by pressing the ‘Power’ button on the
control panel. Then unplug the power cord.
Step 2.
Remove the blender pitcher from the motor base
by grabbing the handle and lifting the jug in an
upward direction.
Step 3.
Remove the blade assembly by turning over the blender
jug and twisting the Blade Removal System clockwise to
unlock, (see Fig 1) then lift upwards and away from the
base of the blender jug. The circular plastic surround
attached to the base of the blender jug is not removable.
Step 4.
Operating your Breville ikon
Hemisphere
TM
LCD Blender
continued
Step 10.
For ingredients that require short bursts of power,
select the ‘PULSE’ function. The ‘PULSE’ button will
illuminate and remain illuminated while the button is
pushed. When this function is selected, the LCD timer
screen will illuminate and count upwards in one
second increments during pulsing. Press the ‘PULSE’
button in short bursts until blending is complete.
Use the ‘PULSE’ button when the food that is
being processed is too thick or coarse to
circulate within the blender pitcher.
Note
Step 11.
At the end of use, always make sure the Breville ikon
Hemisphere™ LCD Blender is turned off by pressing
the ‘Power’ button on the control panel and then
unplug the cord. Make sure the motor and blades
have completely stopped before attempting to move
the appliance, or when the Breville ikon Hemisphere
TM
LCD Blender is not in use and before disassembling,
leaning and storing.
• During the blending process, ingredients may
stick to the sides of the blender pitcher. To
push the food back onto the blades, press the
‘Power’ button on the control panel and
remove the power cord. Remove the lid and
use a plastic spatula to scrape down the sides
of the pitcher. Replace the lid before
recommencing blending.
• If any moisture or liquid appears on top of the
motor base during blending, press the ‘Power’
button on the control panel and remove the
power plug. Remove the blender pitcher. Wipe
the motor base immediately with a dry cloth or
paper towel to absorb the liquid. Check that
the blender pitcher is correctly assembled.
Note
10
The Breville ikon Hemisphere
TM
LCD Blender
features a Two-Part Blade Assembly System for
the easy removal of the blade and jug for cleaning.
Note
Use care handling the blades. Remove the silicon seal
from the blade assembly. Place the blade holder on the
counter-top with blades upward. Grip the lower half of
the blade holder around the outer wall and press
downwards in a sharp movement. The two parts will
separate with a click.
Fig 1
Notch
Notch
BBL600XL_IB_p10-p11.pdf 1 16/03/11 11:27 AM
11
Disassembling your blender for cleaning,
care and storage
Step 1.
Always make sure the Breville ikon Hemisphere
TM
LCD Blender is off by pressing the ‘Power’ button on the
control panel. Then unplug the power cord.
Step 2.
Remove the blender pitcher from the motor base
by grabbing the handle and lifting the jug in an
upward direction.
Step 3.
Remove the blade assembly by turning over the blender
jug and twisting the Blade Removal System clockwise to
unlock, (see Fig 1) then lift upwards and away from the
base of the blender jug. The circular plastic surround
attached to the base of the blender jug is not removable.
Step 4.
Operating your Breville ikon
Hemisphere
TM
LCD Blender
continued
Step 10.
For ingredients that require short bursts of power,
select the ‘PULSE’ function. The ‘PULSE’ button will
illuminate and remain illuminated while the button is
pushed. When this function is selected, the LCD timer
screen will illuminate and count upwards in one
second increments during pulsing. Press the ‘PULSE’
button in short bursts until blending is complete.
Use the ‘PULSE’ button when the food that is
being processed is too thick or coarse to
circulate within the blender pitcher.
Note
Step 11.
At the end of use, always make sure the Breville ikon
Hemisphere™ LCD Blender is turned off by pressing
the ‘Power’ button on the control panel and then
unplug the cord. Make sure the motor and blades
have completely stopped before attempting to move
the appliance, or when the Breville ikon Hemisphere
TM
LCD Blender is not in use and before disassembling,
leaning and storing.
• During the blending process, ingredients may
stick to the sides of the blender pitcher. To
push the food back onto the blades, press the
‘Power’ button on the control panel and
remove the power cord. Remove the lid and
use a plastic spatula to scrape down the sides
of the pitcher. Replace the lid before
recommencing blending.
• If any moisture or liquid appears on top of the
motor base during blending, press the ‘Power’
button on the control panel and remove the
power plug. Remove the blender pitcher. Wipe
the motor base immediately with a dry cloth or
paper towel to absorb the liquid. Check that
the blender pitcher is correctly assembled.
Note
10
The Breville ikon Hemisphere
TM
LCD Blender
features a Two-Part Blade Assembly System for
the easy removal of the blade and jug for cleaning.
Note
Use care handling the blades. Remove the silicon seal
from the blade assembly. Place the blade holder on the
counter-top with blades upward. Grip the lower half of
the blade holder around the outer wall and press
downwards in a sharp movement. The two parts will
separate with a click.
Fig 1
Notch
Notch
BBL600XL_IB_p10-p11.pdf 1 16/03/11 11:27 AM
Care and cleaning
13
Cleaning the motor base
• Wipe the motor base with a soft, damp cloth then
dry thoroughly.
• Wipe any excess food particles from the
power cord.
Do not use abrasive souring pads or cleaners
when cleaning the motor base as they may
scratch the surface.
Note
Cleaning the blender pitcher, lid, inner
lid and blade assembly
• Wash all parts in warm soapy water with a soft
cloth. Use a brush to dislodge stubborn foods.
Rinse and dry thoroughly.
• The blender jug can be washed on a normal cycle
in the dishwasher. Please place the blender jug
upside down. If not placed upside down, the dish
washer heating element may damage the jug base.
Periodically, run a cycle with the jar filled
1
⁄
3
with
warm soapy water to help clean in between the
gaskets/washers of the blade assembly as fruit
juices can get in and act somewhat like an
adhesive which would make the blades difficult
to turn and therefore put extra pressure and
resistance on the motor.
Note
Removing stubborn or strong food stains
Strong smelling foods such as garlic, fish and some
vegetables such as carrots may leave an odor or
stain on the blender pitcher and lid. To remove, soak
blender pitcher and lid for 5 minutes in warm soapy
water. Then wash with a mild detergent and warm
water, rinse well and dry thoroughly.
Storage
Store your Breville ikon Hemisphere
TM
LCD Blender
upright with the blender pitcher, lid and inner lid
assembled and inserted on the motor base or beside
it. Do not place anything on top.
Reassembling your blender jug after
cleaning
Step 1.
Make sure all parts are clean and completely dry.
Step 2.
12
BE CAREFUL WHEN HANDLING THE BLENDING BLADES AS THEY ARE SHARP.
MISHANDLING OF THE BLADES MAY CAUSE INJURY.
and odors
To reassemble the blender - ensure the lower part of
the Blade Holder is clipped into place by aligning the
parts and squeezing together at the edges until they
snap together, and then replace the silicon seal onto
the blade assembly with the raised rim of the
Removable Silicone Gasket facing downward. Place
the Gasket onto the Blade Assembly and push down
until it clicks into place. You should be able to read
THIS WAY UP on the gasket. (see Fig 1).
You will notice 2 notches on the blade assembly
(see pg 11- Fig 1). Place these notches into the 2
slots on the bottom of the jug (see Fig 2). Twist
the Blade Removal System counterclockwise in the
direction of the indicator symbol until firmly locked
into position.
Operating your Breville ikon
Hemisphere
TM
LCD Blender
continued
Seal must be fitted firm around the blade holder.
Note
Fig 1
Fig 2
BBL600XL_IB_p12-p13.pdf 1 15/03/11 2:56 PM
Care and cleaning
13
Cleaning the motor base
• Wipe the motor base with a soft, damp cloth then
dry thoroughly.
• Wipe any excess food particles from the
power cord.
Do not use abrasive souring pads or cleaners
when cleaning the motor base as they may
scratch the surface.
Note
Cleaning the blender pitcher, lid, inner
lid and blade assembly
• Wash all parts in warm soapy water with a soft
cloth. Use a brush to dislodge stubborn foods.
Rinse and dry thoroughly.
• The blender jug can be washed on a normal cycle
in the dishwasher. Please place the blender jug
upside down. If not placed upside down, the dish
washer heating element may damage the jug base.
Periodically, run a cycle with the jar filled
1
⁄
3
with
warm soapy water to help clean in between the
gaskets/washers of the blade assembly as fruit
juices can get in and act somewhat like an
adhesive which would make the blades difficult
to turn and therefore put extra pressure and
resistance on the motor.
Note
Removing stubborn or strong food stains
Strong smelling foods such as garlic, fish and some
vegetables such as carrots may leave an odor or
stain on the blender pitcher and lid. To remove, soak
blender pitcher and lid for 5 minutes in warm soapy
water. Then wash with a mild detergent and warm
water, rinse well and dry thoroughly.
Storage
Store your Breville ikon Hemisphere
TM
LCD Blender
upright with the blender pitcher, lid and inner lid
assembled and inserted on the motor base or beside
it. Do not place anything on top.
Reassembling your blender jug after
cleaning
Step 1.
Make sure all parts are clean and completely dry.
Step 2.
12
BE CAREFUL WHEN HANDLING THE BLENDING BLADES AS THEY ARE SHARP.
MISHANDLING OF THE BLADES MAY CAUSE INJURY.
and odors
To reassemble the blender - ensure the lower part of
the Blade Holder is clipped into place by aligning the
parts and squeezing together at the edges until they
snap together, and then replace the silicon seal onto
the blade assembly with the raised rim of the
Removable Silicone Gasket facing downward. Place
the Gasket onto the Blade Assembly and push down
until it clicks into place. You should be able to read
THIS WAY UP on the gasket. (see Fig 1).
You will notice 2 notches on the blade assembly
(see pg 11- Fig 1). Place these notches into the 2
slots on the bottom of the jug (see Fig 2). Twist
the Blade Removal System counterclockwise in the
direction of the indicator symbol until firmly locked
into position.
Operating your Breville ikon
Hemisphere
TM
LCD Blender
continued
Seal must be fitted firm around the blade holder.
Note
Fig 1
Fig 2
BBL600XL_IB_p12-p13.pdf 1 15/03/11 2:56 PM
15
Tips on how to best use your
Breville ikon Hemisphere
TM
LCD Blender
Do
• Use Low speeds (1-3 – Snow, Mix and Blend) for
drink or cocktail making and emulsions such as
mayonnaise, dressings, marinades and foods that
require mixing until just combined, such as batters.
• Use High speeds (4-5 – Liquify and Puree) for
pureeing soups and aerating liquids.
• Use ‘PULSE’ for foods that only require short bursts
of power such as chopping nuts.
• Use ‘ICE CRUSH’ for ice crushing. The maximum
amount of ice cubes the blender can blend at any
one time is 1 standard ice tray or 9 oz.
• Use ‘SMOOTHIE’ for drink making using both liquid
and solid ingredients.
• Make sure all foods are cut into cubes (approx. 1
inch squares) where appropriate to achieve an
even result.
• Do not put more than 2 cups of warm ingredients
into the Breville ikon Hemisphere
TM
LCD Blender before
blending. After the blending process has begun and
the blades are turning you may slowly add another
1
1
/
2
cups of ingredients through the opening in the
lid if desired.
• Thick mixtures puree more efficiently if the Breville
ikon Hemisphere
TM
LCD Blender is
1
/
4
to
1
/
2
full.
• When using several ingredients, place liquid
ingredients in
the blender pitcher before solid
ingredients, unless specified in the recipe.
• When blending thick or dry mixtures it may be
necessary to stop the Breville ikon Hemisphere
TM
LCD Blender and scrape down the sides of the blender
pitcher with a plastic or rubber spatula, once or
twice during blending. Do not use metal utensils as
they may damage the blades or blender pitcher.
• To create even, powdery snow for flavored ice
drinks, use large dry ice that has come straight
from the freezer, then simply blend on 'SNOW'.
14
Don’t
• Do not operate a heavy mixture for more than 10
seconds. For normal blending tasks, for example,
mayonnaise, dressings etc., do not operate for
longer than 1 minute at a time without turning off
the Breville ikon Hemisphere
TM
LCD Blender and stirring
the ingredients, and then continue blending.
• Do not operate the Breville ikon Hemisphere
TM
LCD Blender without having the blender lid in position.
To add additional ingredients while blending,
remove the inner lid and place ingredients through
the opening in the lid.
• Do not fill the blender pitcher above the 'MAX' line.
When the blender pitcher is filled at or near the
'MAX' line, place one hand on the blender lid to
avoid displacement of the lid during operation.
• Do not place any objects, other than food or
liquid, into the Breville ikon Hemisphere
TM
LCD Blender
while the motor is running.
• Do not use the blender pitcher to store food.
• The blender will not knead dough or
mash potatoes.
• Do not remove the blender pitcher while the Breville
ikon Hemisphere
TM
LCD Blender is operating. Always make
sure the blender is off by pressing the ‘Power’ button,
and unplug the power cord from the power outlet.
• Do not overload the Breville ikon Hemisphere
TM
LCD Blender with more than the specified quantity of
ingredients as doing so could cause the motor to
stall. Turn the Breville ikon Hemisphere
TM
LCD Blender off
by pressing the ‘Power’ button on the control panel,
and unplug the cord. Remove a portion of the
mixture from the blender pitcher before continuing.
• Do not place hot or boiling ingredients into the
Breville ikon Hemisphere
TM
LCD Blender; allow to cool
before placing into the blender pitcher.
BBL600XL_IB_p14-p15.pdf 1 15/03/11 11:26 AM
15
Tips on how to best use your
Breville ikon Hemisphere
TM
LCD Blender
Do
• Use Low speeds (1-3 – Snow, Mix and Blend) for
drink or cocktail making and emulsions such as
mayonnaise, dressings, marinades and foods that
require mixing until just combined, such as batters.
• Use High speeds (4-5 – Liquify and Puree) for
pureeing soups and aerating liquids.
• Use ‘PULSE’ for foods that only require short bursts
of power such as chopping nuts.
• Use ‘ICE CRUSH’ for ice crushing. The maximum
amount of ice cubes the blender can blend at any
one time is 1 standard ice tray or 9 oz.
• Use ‘SMOOTHIE’ for drink making using both liquid
and solid ingredients.
• Make sure all foods are cut into cubes (approx. 1
inch squares) where appropriate to achieve an
even result.
• Do not put more than 2 cups of warm ingredients
into the Breville ikon Hemisphere
TM
LCD Blender before
blending. After the blending process has begun and
the blades are turning you may slowly add another
1
1
/
2
cups of ingredients through the opening in the
lid if desired.
• Thick mixtures puree more efficiently if the Breville
ikon Hemisphere
TM
LCD Blender is
1
/
4
to
1
/
2
full.
• When using several ingredients, place liquid
ingredients in
the blender pitcher before solid
ingredients, unless specified in the recipe.
• When blending thick or dry mixtures it may be
necessary to stop the Breville ikon Hemisphere
TM
LCD Blender and scrape down the sides of the blender
pitcher with a plastic or rubber spatula, once or
twice during blending. Do not use metal utensils as
they may damage the blades or blender pitcher.
• To create even, powdery snow for flavored ice
drinks, use large dry ice that has come straight
from the freezer, then simply blend on 'SNOW'.
14
Don’t
• Do not operate a heavy mixture for more than 10
seconds. For normal blending tasks, for example,
mayonnaise, dressings etc., do not operate for
longer than 1 minute at a time without turning off
the Breville ikon Hemisphere
TM
LCD Blender and stirring
the ingredients, and then continue blending.
• Do not operate the Breville ikon Hemisphere
TM
LCD Blender without having the blender lid in position.
To add additional ingredients while blending,
remove the inner lid and place ingredients through
the opening in the lid.
• Do not fill the blender pitcher above the 'MAX' line.
When the blender pitcher is filled at or near the
'MAX' line, place one hand on the blender lid to
avoid displacement of the lid during operation.
• Do not place any objects, other than food or
liquid, into the Breville ikon Hemisphere
TM
LCD Blender
while the motor is running.
• Do not use the blender pitcher to store food.
• The blender will not knead dough or
mash potatoes.
• Do not remove the blender pitcher while the Breville
ikon Hemisphere
TM
LCD Blender is operating. Always make
sure the blender is off by pressing the ‘Power’ button,
and unplug the power cord from the power outlet.
• Do not overload the Breville ikon Hemisphere
TM
LCD Blender with more than the specified quantity of
ingredients as doing so could cause the motor to
stall. Turn the Breville ikon Hemisphere
TM
LCD Blender off
by pressing the ‘Power’ button on the control panel,
and unplug the cord. Remove a portion of the
mixture from the blender pitcher before continuing.
• Do not place hot or boiling ingredients into the
Breville ikon Hemisphere
TM
LCD Blender; allow to cool
before placing into the blender pitcher.
BBL600XL_IB_p14-p15.pdf 1 15/03/11 11:26 AM
17
Suggested uses for your
Breville ikon Hemisphere
TM
LCD Blender
16
Food Preparation & Usage Quantity Function Time
Lean meat/ Trim excess fat and sinew, 9oz Speed 2/Mix 10-20 secs
poultry cut into 1 inch cubes
Use: mince
Fish/seafood Remove skin and bones 10oz Speed 2/Mix 10-15 secs
and cut into 1 inch cubes
Use: mince
Raw veg Peel and cut into 7oz Speed 2/Mix 10-30 secs
1/2-1 inch cubes
Use: stuffing, filling, puree, soup
Nuts sces 03-01xiM/2 deepSzo7niks evomeR
Use: cakes, toppings, pastes
Bread or biscuit Cut bread into 1 inch pieces, 3.5oz Speed 2/Mix 10-30 secs
crumbs break up biscuits
Use: cheesecakes
Mayonnaise Mix the egg yolk and vinegar. 4oz Speed 2/Mix 60 secs
Add the oil
Use: dressings
Whipped cream Add sugar or vanilla if desired
3
/
4
cup Speed 2/Mix 60 secs
Use: topping
Herbs/spices Whole or halve 1 cup Speed 2/Mix 20-30 secs
Use: pastes, sauces
Smoothie Milk, whole fresh fruits, Max 3
1
/
4
cups Smoothie or 20-30 secs
yoghurt, ice cream Speed 3/Blend
Use: milkshakes, frappes
Fresh fruit Whole, chopped berries 9oz Speed 2/Mix 30 secs
Use: dessert sauce
Dried fruit Chopped dry fruit 10oz Speed 2/Mix 30 secs
Use: fruit mince
Ice Crush Max 1 tray Ice Crush or 10-20 secs
wonS/1 deepSseipruls,sliatkcoc,sknird dexim:esU
Ice making capabilities of your Breville ikon
Hemisphere
TM
LCD Blender
The revolutionary Breville ikon Hemisphere
TM
LCD
Blender allows you to make different consistencies of
ice depending on your blending needs. ‘Speed 1/SNOW’
and ‘AUTO PULSE /ICE CRUSH’ offer two distinctly
alternative icy results. When using ice on either
setting, be sure to consider the actual condition of
the cubes before proceeding, as it will affect the
end consistency.
‘Speed 1/SNOW’ is unique to the Breville ikon
Hemisphere
TM
LCD Blender and will allow you to make
even, powdery snow. When making Snow, be sure to
use only large, solid, dry ice that has come straight from
the freezer (22 ºF / -5.6 ºC, or below). If using ice cubes
with ‘Speed1/Snow’ that are small, slightly melted or
even hollow, the end result may form an igloo and
leave lumps of ice. If the condition of the ice cubes
appear to be small, hollow or even slightly melted
only use with the ‘ICE CRUSH’ setting.
For applications when you desire a coarse
consistency, use the ‘ICE CRUSH’ setting, in which
case any type of ice cubes may be used.
The ice cube matters. To create even, powdery
snow
for flavored ice drinks, be sure to only use
large, solid, dry ice that has come straight from
the freezer, then press ‘Speed 1/SNOW’.
When coarser ice is required, use any type of ice,
then press 'ICE CRUSH'.
Note
Coarse ice is great for using as a base for fresh
oysters. Snowed ice is great for Shrimp cocktails
or slushie frozen treats!
Note
BBL600XL_IB_p16-p17.pdf 1 15/03/11 11:30 AM
17
Suggested uses for your
Breville ikon Hemisphere
TM
LCD Blender
16
Food Preparation & Usage Quantity Function Time
Lean meat/ Trim excess fat and sinew, 9oz Speed 2/Mix 10-20 secs
poultry cut into 1 inch cubes
Use: mince
Fish/seafood Remove skin and bones 10oz Speed 2/Mix 10-15 secs
and cut into 1 inch cubes
Use: mince
Raw veg Peel and cut into 7oz Speed 2/Mix 10-30 secs
1/2-1 inch cubes
Use: stuffing, filling, puree, soup
Nuts sces 03-01xiM/2 deepSzo7niks evomeR
Use: cakes, toppings, pastes
Bread or biscuit Cut bread into 1 inch pieces, 3.5oz Speed 2/Mix 10-30 secs
crumbs break up biscuits
Use: cheesecakes
Mayonnaise Mix the egg yolk and vinegar. 4oz Speed 2/Mix 60 secs
Add the oil
Use: dressings
Whipped cream Add sugar or vanilla if desired
3
/
4
cup Speed 2/Mix 60 secs
Use: topping
Herbs/spices Whole or halve 1 cup Speed 2/Mix 20-30 secs
Use: pastes, sauces
Smoothie Milk, whole fresh fruits, Max 3
1
/
4
cups Smoothie or 20-30 secs
yoghurt, ice cream Speed 3/Blend
Use: milkshakes, frappes
Fresh fruit Whole, chopped berries 9oz Speed 2/Mix 30 secs
Use: dessert sauce
Dried fruit Chopped dry fruit 10oz Speed 2/Mix 30 secs
Use: fruit mince
Ice Crush Max 1 tray Ice Crush or 10-20 secs
wonS/1 deepSseipruls,sliatkcoc,sknird dexim:esU
Ice making capabilities of your Breville ikon
Hemisphere
TM
LCD Blender
The revolutionary Breville ikon Hemisphere
TM
LCD
Blender allows you to make different consistencies of
ice depending on your blending needs. ‘Speed 1/SNOW’
and ‘AUTO PULSE /ICE CRUSH’ offer two distinctly
alternative icy results. When using ice on either
setting, be sure to consider the actual condition of
the cubes before proceeding, as it will affect the
end consistency.
‘Speed 1/SNOW’ is unique to the Breville ikon
Hemisphere
TM
LCD Blender and will allow you to make
even, powdery snow. When making Snow, be sure to
use only large, solid, dry ice that has come straight from
the freezer (22 ºF / -5.6 ºC, or below). If using ice cubes
with ‘Speed1/Snow’ that are small, slightly melted or
even hollow, the end result may form an igloo and
leave lumps of ice. If the condition of the ice cubes
appear to be small, hollow or even slightly melted
only use with the ‘ICE CRUSH’ setting.
For applications when you desire a coarse
consistency, use the ‘ICE CRUSH’ setting, in which
case any type of ice cubes may be used.
The ice cube matters. To create even, powdery
snow
for flavored ice drinks, be sure to only use
large, solid, dry ice that has come straight from
the freezer, then press ‘Speed 1/SNOW’.
When coarser ice is required, use any type of ice,
then press 'ICE CRUSH'.
Note
Coarse ice is great for using as a base for fresh
oysters. Snowed ice is great for Shrimp cocktails
or slushie frozen treats!
Note
BBL600XL_IB_p16-p17.pdf 1 15/03/11 11:30 AM
Warranty
19
Troubleshooting
Troubleshooting chart
18
Problem Solution
Motor doesn’t start or blade doesn’t rotate • Check that the power plug is securely inserted into
the power outlet and switched on.
• Check that the blender jug and lid are securely
locked into position.
• Check that the ‘Power’ button and selected function
or speed setting is illuminated.
• Be sure to press only one speed or function button
at a time.
ro emit eno ta deppohc gnieb si doof hcum oot rehtiE deppohc ylnevenu si dooF
the pieces are not small enough. Try cutting food into
smaller pieces of even size and processing a smaller
amount per batch. For best results the food should be
chopped into pieces no larger than
3
/
4
inch (2cm).
ssecorp ro seslup feirb esU.dessecorp revo si doof ehTyretaw si ro enif oot deppohc si dooF
for a shorter time.
Food sticks to blade Processing too much food. Turn the blender off by pressing the
‘Power’ button on the control panel. Then switch off at the power
outlet and unplug the power cord. When the blade stops rotating,
remove the blender lid and remove some food with a spatula.
Ice is not chopping to desired consistency The actual condition of the ice cubes will impact the end consistency.
Use larger, solid dry ice on Snow/Speed 1 to create a snow
Use any type of ice on ‘ICE CRUSH’ when coarser chopped ice
is required.
Overload Protection warning on the LCD will start to flash and
keys do not respond.
The motor is being overloaded. Once the warning stops flashing the
blender has cooled sufficiently and is ready to use again. Re-select the
desired speed or function button. If you have turned the blender off you
will need to switch it back on, wait for the flashing to stop then re-select
the desired speed or function.
One year limited warranty
Subject to the conditions below, HWI Breville
®
warrants for one year from the date of purchase
that this Breville
®
appliance is free of defects in
material and workmanship. This warranty does
not cover damages to the appliance or to any of
its parts that are caused by abuse, misuse,
neglect, wear and tear, including damages
caused by using the appliance in a manner not
contemplated by the instruction manual,
including use on current or voltage other than
that marked on the product, or by failing to follow
safety, operating, care or cleaning instructions or
alteration or repair not authorized by HWI
Breville
®
. Where applicable, this warranty covers
the repair and/or replacement of a defective
product at HWI Breville
®
’s option.
This warranty provides specified rights. Consum-
ers may also have other rights which vary from
state to state, or province to province.
Term of warranty:
The warranty extends for one year from the date
of original purchase by a consumer, and does not
apply to purchases by retailers or distributors, or
to purchases for commercial use. If a replace-
ment product is sent, it will carry the remaining
warranty of the original product.
Please contact our Customer Service Center at
www.Breville.com or call the toll free number
provided for instructions on the repair and/or
replacement of the appliance if a covered defect
occurs within the one year warranty period.
Conditions:
In order to be eligible for this warranty, the
consumer must purchase the Breville
®
appliance
from an “Authorized Retailer” and must provide
proof that the product was purchased within one
year prior to making any claim under the
warranty. Registering the product with HWI
Breville
®
, while appreciated, is not required, and
is not a substitute for proof of purchase.
Disclaimer:
This warranty covers the repair and/or replace-
ment of products. HWI Breville
®
expressly
disclaims all responsibility for consequential
damages for incidental losses caused by use of
this appliance. Some states or provinces do not
allow this exclusion or limitation for incidental or
consequential losses, so the foregoing disclaimer
may not apply to you.
Fitness and merchantability: any warranty of
merchantability or fitness with respect to this
product is also limited to the one year limited
warranty period. The warranties set forth herein
are exclusive and not other warranties, express or
implied, are made by HWI Breville
®
or are
authorized to be made with respect to the product.
If the appliance should become defective within
the warranty period, do not return the appliance
to the store. Please visit us online at
www.Breville.com or:
Toll free phone number:
USA: 1-866-BREVILLE (1-866-273-8455)
CANADA: 1-866-BREVILLE (1-866-273-8455)
Email:
USA: AskUs@BrevilleUSA.com
CANADA: AskUs@Breville.ca
BBL600XL_IB_p18-p19.pdf 1 16/03/11 11:00 AM
Warranty
19
Troubleshooting
Troubleshooting chart
18
Problem Solution
Motor doesn’t start or blade doesn’t rotate • Check that the power plug is securely inserted into
the power outlet and switched on.
• Check that the blender jug and lid are securely
locked into position.
• Check that the ‘Power’ button and selected function
or speed setting is illuminated.
• Be sure to press only one speed or function button
at a time.
ro emit eno ta deppohc gnieb si doof hcum oot rehtiE deppohc ylnevenu si dooF
the pieces are not small enough. Try cutting food into
smaller pieces of even size and processing a smaller
amount per batch. For best results the food should be
chopped into pieces no larger than
3
/
4
inch (2cm).
ssecorp ro seslup feirb esU.dessecorp revo si doof ehTyretaw si ro enif oot deppohc si dooF
for a shorter time.
Food sticks to blade Processing too much food. Turn the blender off by pressing the
‘Power’ button on the control panel. Then switch off at the power
outlet and unplug the power cord. When the blade stops rotating,
remove the blender lid and remove some food with a spatula.
Ice is not chopping to desired consistency The actual condition of the ice cubes will impact the end consistency.
Use larger, solid dry ice on Snow/Speed 1 to create a snow
Use any type of ice on ‘ICE CRUSH’ when coarser chopped ice
is required.
Overload Protection warning on the LCD will start to flash and
keys do not respond.
The motor is being overloaded. Once the warning stops flashing the
blender has cooled sufficiently and is ready to use again. Re-select the
desired speed or function button. If you have turned the blender off you
will need to switch it back on, wait for the flashing to stop then re-select
the desired speed or function.
One year limited warranty
Subject to the conditions below, HWI Breville
®
warrants for one year from the date of purchase
that this Breville
®
appliance is free of defects in
material and workmanship. This warranty does
not cover damages to the appliance or to any of
its parts that are caused by abuse, misuse,
neglect, wear and tear, including damages
caused by using the appliance in a manner not
contemplated by the instruction manual,
including use on current or voltage other than
that marked on the product, or by failing to follow
safety, operating, care or cleaning instructions or
alteration or repair not authorized by HWI
Breville
®
. Where applicable, this warranty covers
the repair and/or replacement of a defective
product at HWI Breville
®
’s option.
This warranty provides specified rights. Consum-
ers may also have other rights which vary from
state to state, or province to province.
Term of warranty:
The warranty extends for one year from the date
of original purchase by a consumer, and does not
apply to purchases by retailers or distributors, or
to purchases for commercial use. If a replace-
ment product is sent, it will carry the remaining
warranty of the original product.
Please contact our Customer Service Center at
www.Breville.com or call the toll free number
provided for instructions on the repair and/or
replacement of the appliance if a covered defect
occurs within the one year warranty period.
Conditions:
In order to be eligible for this warranty, the
consumer must purchase the Breville
®
appliance
from an “Authorized Retailer” and must provide
proof that the product was purchased within one
year prior to making any claim under the
warranty. Registering the product with HWI
Breville
®
, while appreciated, is not required, and
is not a substitute for proof of purchase.
Disclaimer:
This warranty covers the repair and/or replace-
ment of products. HWI Breville
®
expressly
disclaims all responsibility for consequential
damages for incidental losses caused by use of
this appliance. Some states or provinces do not
allow this exclusion or limitation for incidental or
consequential losses, so the foregoing disclaimer
may not apply to you.
Fitness and merchantability: any warranty of
merchantability or fitness with respect to this
product is also limited to the one year limited
warranty period. The warranties set forth herein
are exclusive and not other warranties, express or
implied, are made by HWI Breville
®
or are
authorized to be made with respect to the product.
If the appliance should become defective within
the warranty period, do not return the appliance
to the store. Please visit us online at
www.Breville.com or:
Toll free phone number:
USA: 1-866-BREVILLE (1-866-273-8455)
CANADA: 1-866-BREVILLE (1-866-273-8455)
Email:
USA: AskUs@BrevilleUSA.com
CANADA: AskUs@Breville.ca
BBL600XL_IB_p18-p19.pdf 1 16/03/11 11:00 AM
Model BBL600XL /C Issue B11 Packaging Code: AM / CN
Breville is a registered trademark of Breville Pty. Ltd.
Breville Customer Service Center
US Customers
19400 South Western Avenue
Torrance
CA 90501
Service Center: 1 (866) BREVILLE
Email askus@brevilleUSA.com
www.breville.com
Canada Customers
Anglo Canadian
2555, De L’ Aviation
Pointe-Claire (Montréal) Québec
H9P 2Z2
Service Center: 1 (866) BREVILLE
Fax (514) 683-5554
Email askus@breville.ca
www.breville.com
© Copyright. Breville Pty. Ltd. 2011
Due to continual improvements in design or otherwise, the product you
purchase may differ slightly from the one illustrated in this booklet.
ikon Hemisphere
™
LCD Blender
Model BBL600XL /C
BBL600XL_IB_OBC_OFC.pdf 1 17/03/11 9:48 AM
