Loading ...
Loading ...
Loading ...
• 7 •
PROBLEM POSSIBLE CAUSE SOLUTION
The unit won’t power my 12V
device.
The 12V device is not
turned on.
The unit’s battery is not
charged.
The 12V device draws more
than 15A or has a short
circuit.
Turn on the 12V device.
Check the battery charge
status by pressing the Battery
Status button.
Disconnect the 12V device.
The internal breaker will
automatically reset after a
minute or two. Try the 12V
device again.
The battery in the unit won’t
hold a charge.
The battery is bad (will not
accept a charge).
Have the battery checked.
The compressor shuts off.
(Model BE01254 only.)
The compressor is
overheated.
Allow to cool for a few
minutes, then try again.
8. BEFORE RETURNING FOR REPAIRS
If these solutions do not eliminate the problem,
or for more information about troubleshooting,
contact customer service for assistance:
www.batterychargers.com
or call 1-800-621-5485
Monday-Friday 7:00am to 5:00pm CST
For REPAIR OR RETURN, contact Customer Service at 1-800-621-5485.
DO NOT SHIP UNIT until you receive a RETURN MERCHANDISE AUTHORIZATION
(RMA) number from Customer Service at Schumacher Electric Corporation.
9. SPECIFICATIONS
Internal battery type ....................................Sealed, maintenance-free, AGM, lead-acid
Nominal voltage .................................................................................................12V DC
12V DC power output............................................................................... Rated for 15A
10. REPLACEMENT PARTS/ACCESSORIES
Compressor adapter kit and bag (for model BE01254) ........................... 2299001425Z
Male-to-male accessory cable ........................................................................94500109
Loading ...
Loading ...
Loading ...