Loading ...
Loading ...
Loading ...
• 4 •
3. FEATURES
BE01254
1. Battery clamps
2. Rotary switch for USB and jump starter
3. Worklight ON/OFF switch
4. Built-in work light
5. Battery status indicators
6. Battery status button
7. USB port
8. 12V DC power outlet
9. Air compressor adapters
and storage bag
10. Air compressor hose
On back:
• Air compressor gauge
• Air compressor ON/OFF switch
• Internal battery charger port
• Air compressor hose wrap cleats
1
2
3
4 5 6 7 8
9
10
BE01253
1. Battery clamps
2. Rotary switch
3. Battery status indicators
4. Battery status button
5. 12V DC power outlet
1
32
54
4. CHARGING THE INTERNAL BATTERY OF THE UNIT
IMPORTANT! CHARGE IMMEDIATELY
AFTER PURCHASE, AFTER EACH USE
AND EVERY 30 DAYS, TO KEEP THE
UNIT’S INTERNAL BATTERY FULLY
CHARGED AND PROLONG BATTERY
LIFE.
CHECKING THE LEVEL OF THE
INTERNAL BATTERY
Press the Battery Status button on the
front of the unit. The LED lights will indicate
the current charge level as follows:
RED – less than 20% of full charge;
immediately charge the unit.
YELLOW – 20-80% of full charge.
GREEN – more than 80% of full charge.
CHARGING THE INTERNAL BATTERY
Charge the internal battery for the unit
using an extension cord (not included).
NOTE: Use of an improper extension
cord could result in a risk of re and
electric shock.
1. To charge, ip the AC connector on
the back of the unit down and plug in
an 18 AWG or larger extension cord.
2. Plug the extension cord into a 120VAC
electrical wall outlet.
3. While the unit is charging, the RED LED
will be on. Complete charging may take
up to 72 hours. When the RED LED
turns off, the unit is ready to use.
4. When the internal battery is fully
charged, the charger will automatically
go into maintain mode and maintain
the battery at full charge without
damaging it. When in maintain mode,
the GREEN LED will pulse, as long
as there is an AC cord connected to
the charging port.
5. Charge the unit as soon as possible
after use.
Loading ...
Loading ...
Loading ...