Loading ...
Loading ...
Loading ...
SERVICE
RECORDS
SCHEDULE
Fill in dates as After Before Fre- Every Every Every Begin Before
you complete First Each quently 5 10 25 Each StoragG
regular service 2 use Hours Noun=Hours Season "
Hours
SERVICE
DATES
Lubricateall PivotPoints I,J
Check Engine OilLevel lvJ
Change Engine Oil e_
ReplaceAir Cleaner Filter /J
Check Spark PlUg p_ if
Check Drive Belt If
Tighten All Screws and Nuts Ivj /f
Check Blade Wear/Damage
LubricateQuillRod/Tube iv_ iv#
PRODUCT SPECIFICATIONS
HORSEPOWER: 3.5
DISPLACEMENT: 10 cu. in. (163 cc)
GASOLINE CAPACITY: 1.25 qt.
(unleaded regular)
LUBRICATION: 20 oz. SAE-30W
SPARK PLUG: Champion RJ19LM
(Gap .030) or Equivalent
GENERAL RECOMMENDATIONS
The warranty on this Edger does not cover
items that have been subjected to operator
abuse or negligence. To receive full value
from the warranty, the operator must main-
tain the Edger as instructed in this manual.
The above chart is provided to assist the
operator in properly maintaining the Edger.
LUBRICATION
• After each 25 hours of use of your Edger,
apply light machine oil to all moving
pads.
• The oil in the engine crankcase must be
changed after each 25 hours of use
thereaften
NOTE: If the Edger is being used in sandy
or dusty areas, change the oil more fre-
quently to prevent premature engine wear.
TO CHANGE ENGINE OIL
• Disconnectthe spark plugwire fromthe
spark plug.
• Remove the oil drain plug as shown in
first figure on page 11 and drain the oil
into a flat pan.
• After draining all the oil, reinstall the oil
drain plug securely.
NOTE: The oil will drain more freely when
the engine iswarm.
• Remove the oil fill cap. See figure on
page 8.
• Fill the engine crankcase, pouring slowly.
DO NOT OVERFILL. For approximate ca-
pacity see PRODUCT SPECIFICA-
TIONS. •
NOTE: The quill assembly bearings are
factory sealed and will require no lubrica-
tion.
• Reconnect the spark plug wire on the
spark plug.
lO
Loading ...
Loading ...
Loading ...