Loading ...
Loading ...
Loading ...
About the temperature controls.
Not a# features are on all models. Your controls may be similar to the following."
_i ii _ iii
i i ii_i iii_i _
Door
Temperature
[] Actumlremp Set Temp []
Recommended 0 ° F Recommended 37 ° F
r
Reset
_od3 Se
OR
il ii_i
The temperature controls are preset in the factory at 37°Yfor the refrigerator compartment and O_Yforthe
freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended settings.
The temperature controls can display both the SETtemperature as well as the actual temperature in the
refrigerator and freezer. The actual temperature may vary slightly from the SETtemperature based on usage
and operating environment.
On some models, setting both controls to the warmest setting until the display flashes (off)will stop
cooling in both the freezer and refrigerator compartments.
On other models, setting either control to the warmest setting until the display flashes (off)will stop the
cooling to the freezer and refrigerator.
NOTE'Turning the refrigerator off via the controls on the touch panel does not shut off electrical power to
the refrigerator.
NOTE."The refrigerator is shipped with protective film- covering the temperature controls. If this film was not
removed during installation, remove it now.
Performance Air Flow System
The Performance Air-Flow System is designed to
maximize temperature control in the refrigerator and
freezer compartments. This unique special feature
consists of the Air Tower along the back wall of the
refrigerator and the Air Tunnel on the bottom portion
of the freezer rear wall.
Placing food infront of the louvers on these
components will not affect performance. Although
the Air Tower and the Air Tunnel can beremoved,
doing so will affect temperature performance. (For
removal instructions, on-line, 24 hours a day, contact
us at GEAppliances.corn or call 800.GE.CARES.
In Canada, contact us at geappliances.ca or call
1.800.561.3344.)
Loading ...
Loading ...
Loading ...