EON712 User's Guide

Loading ...

• “HPF on this Speaker” can be used to remove signal below a selected frequency to the built-in amp/speaker

and tweeter bar.

• “LFP on Pass Thru Out” can be used to set the low pass lter on the Thru Out XLR output feed.

• Time Align

• Signal delays are used when multiple speakers are in use but speakers are at different distances from the

audience.

• Examples:

• A subwoofer is front of the stage, while this full range speaker in on the stage. In this conguration, the

Pass Thru XLR to subwoofer will need to be slightly delayed to make up for its closer position to the

audience.

• The Pass Thru XLR out is feeding an additional full range speaker placed half way back in the

audience, to give additional listening distance. In this case, delay the back ll speaker in the audience

to compensate correct time alignment.

• Time Alignment Basics:

• To compensate for different distances’, determine the speaker farthest from the audience and delay

other speakers with the same signal to “time align” with the speaker farthest away from the audience.

• Sound travels through air at average humidity and room temperature at about 1.1 feet per ms. Measure

the difference in distance of each speaker feeding the audience. Feed the speaker farthest from the

audience with no time alignment delay. Set delays for the other closer speakers based on their distance

ahead of the farthest back speaker. Measure the distance difference and enter 1 ms per 1.1 feet that

each speaker is ahead of the farthest back speaker in your conguration. Time alignment is not perfect

as not all audience positions measure the same speaker distance differences.

• “Delay Pass Thru Out” Enter in ms.

• “Delay This Speaker” Enter in ms.

Settings

• “BT Audio Pairing” enables Bluetooth audio pairing for up to 30 seconds. This setting turns off when a pairing has

been made, or after 30 seconds.

• “BT Control Pairing” enables Bluetooth control pairing for up to 30 seconds with the JBL Pro Control app. This

turns off when a pairing has been made, or after 30 seconds.

• The EON700 loudspeaker will conrm a secure pin with the app. Please ensure you conrm this to secure BLE

control pairing.

• “LCD Contrast” allows the user to adjust the LCD contrast between 0 and 100%.

• “Firmware Version” shows the current rmware version loaded onto the speaker.

• “Factory Reset” resets all settings in the speaker to factory default, including Bluetooth communication pairing.

Loading ...

User's Guide - Page 18