Loading ...
Loading ...
Loading ...
Before using for the first time
27
Setting the time of day
The time of day is set automatically if
a connection is established with the
WiFi network.
The display will then change to the
screen for setting the time of day.
The current time of day must be set be-
fore you can use the timer option.
Use the sensor controls to enter
the hour and confirm your entry by
touching OK.
Then set the minutes and confirm
with OK.
Holding down the relevant or
sensor control will increase or de-
crease the time automatically.
Setting the water hardness level
The display will change to the screen
for setting the water hardness.
- You should programme the dish-
washer to the correct water hardness
for your area.
- Your local water authority will be able
to advise you of the water hardness
level in your area.
- Where the water hardness fluctuates
e.g. between 1.8 and 2.7mmol/l (10 -
15 °dH - German scale) always pro-
gramme the dishwasher to the higher
value (2.7mmol/l or 15 °dH in this ex-
ample).
In the event of a fault, it will help the
service technician if you know the hard-
ness of your local water supply.
Therefore, please enter the water hard-
ness:
____________°dH or mmol/l
The dishwasher is programmed at the
factory for a water hardness level of
2.5mmol/l (14°dH – German scale).
Set the water hardness level in your
area and confirm using OK.
See the “Settings” chapter, “Water
hardness” section for more informa-
tion.
Loading ...
Loading ...
Loading ...