Loading ...
Congratulations! You have purchased a product manufactured to the high
quality standards of Summit Appliance. Please read this manual carefully. It
describes the safe operation of this Juice Dispenser and makes suggestions that
will allow you to enjoy the product as fully as possible.
FEATURES
The Summit Model BBS2 double-tank Juice Dispenser offers the following
features:
• Sturdy, crystal-clear Lexan reservoirs
• Stainless steel mixing blades
• Easy-to-operate removable taps
• Factory-set thermostat
• Energy-efficient Embraco compressor
• Quiet performance
• Commercial approval and CalCode compliance
INSTALLATION
When placing this unit on a counter, leave at least 4” of clearance behind the unit
and at each side. This is necessary to permit proper air circulation around the
unit for efficient operation. Also when installing, be sure the unit is level.
The BBS2 Juice Dispenser requires a power source of 115V AC and 60Hz. If the
power cord is damaged, it must be replaced by the manufacturer, authorized
dealer or qualified personnel in order to avoid any electrical hazards during
operation. Use a dedicated power outlet that is not controlled by a switch or pull
chain.
ASSEMBLY
1. Install the drip trays on the front of the unit.
2. Insert the grilles on the drip trays.
NOTES:
•
Remove the protective plastic cover before using the unit.
•
Do not install the unit in the vicinity of heat-producing appliances like
stoves or radiators, and be sure it will not be exposed to direct sunlight.
Loading ...
Loading ...
Loading ...