Loading ...
B) Preparing pedestal before mounting
washer or dryer
1. Locate pedestal to within a few inches of its final location.
A) Preparing washer or dryer for mount-
ing on pedestal
1. If washer or dryer is new and has not been installed yet, skip
to step 4.
2. If dryer is already installed, disconnect dryer from electrical
and gas connections and exhaust venting. On models with
Steam Option, turn off cold water supply and disconnect wa-
ter supply hose to dryer.
3. If washer is already installed, disconnect washer from electri-
cal connection. Turn off hot and cold water supply and dis-
connect hot and cold water supply hoses from water supply
outlets. Disconnect drain hose from drain pipe.
4. Protect floor with cardboard or other covering. Using two or
more persons, carefully tip the washer or dryer onto its back.
Take care not to damage hoses and/or electrical cords as you
lay the unit back.
5. Remove all four (4) adjustable leveling legs from the appliance
base and save for future use.
6. Carefully return appliance to upright position.
2. Level the pedestal front-to-back and side-to-side by adjusting
each leveling leg. Keep leg extension to a minimum.
\
\
lower
Loading ...
Loading ...
Loading ...