Baby Brezza FORMULA PRO ADVANCED Baby Formula Dispenser

User Manual - Page 7

For FORMULA PRO ADVANCED.

PDF File Manual, 8 pages, Read Online | Download pdf file

FORMULA PRO ADVANCED photo
Loading ...
Loading ...
Loading ...
2
3
1
1 2
Monthly Cleaning Instructions
Hand-wash all parts shown above with warm
soapy water, rinse well and dry thoroughly.
Hand wash water tank with warm soapy
water, rinse well and dry thoroughly.
Easy Daily Cleaning Instructions
Once a month, give your Formula Pro® Advanced a thorough cleaning.
Remove Funnel & Funnel Cover by pulling
out and down.
Wash Funnel & Funnel Cover with warm,
soapy water & rinse well.
Dry completely before re-installing.
Wipe the powder-dispensing hole on the
underside of the powder container using a
dry paper towel or soft dry cloth.
IMPORTANT
Monthly Descaling Instructions
Please watch set-up and cleaning videos at babybrezza.com/video.
You can leave the formula powder in the powder tank during the descaling process.
To prevent mineral scale on the water heater inside your Formula Pro® Advanced, follow these easy steps:
1. Remove the water tank, empty it and ll it with 20oz distilled vinegar & 20oz of puried water.
2. Place the water tank on the base of the machine & place a cup larger than 10oz under the funnel.
3. Select “10oz with the ounce” button, then press the water only button to dispense.
4. Empty the cup, place back under the funnel, then press the water only” button again to dispense another 10oz.
5. Now unplug the machine, remove the water tank, and empty it. Let the machine sit for 4 hours.
6. Wash, rinse and ll the water tank to the max line with puried water, then place it back on the base.
7. Plug in the machine, place a cup to catch 10oz water and use the “water only” button to run an 10oz cycle.
Dispose of the water dispensed in the cup and then repeat this step to run the entire tank of puried water
through the machine. When the “Low Water indicator turns on, you’re done rinsing.
8. Rell the water tank with puried water and return to normal use.
It is EXTREMELY IMPORTANT to clean the funnel after every 4 bottles made.
This will keep your Formula Pro® Advanced dispensing accurately.
Always make sure Funnel & Funnel cover are COMPLETELY DRY before re-assembling.
PLEASE NOTE: You don’t need to remove the powder container or the powder container parts for daily cleaning.
To make daily cleaning even easier, you can
purchase an extra funnel & funnel cover on
BabyBrezza.com Then you can swap the
spare funnel with the funnel that needs
to be cleaned. NOTE: you will still need to
wipe the powder dispensing hole as shown in Step 3
Suggestion to make cleaning easier
1211
Loading ...