Loading ...
Loading ...
Loading ...
1
2
3
4
5
6
7
Preparing your rst bottle continuedPreparing your rst bottle continued
Press the “start” button to dispense formula.
The Formula Pro® Advanced will dispense
powder & water together, then stop
automatically when dispensing is complete.
Check for clumps and shake or stir the bottle
if necessary. Check temperature and feed
your baby.
Ounce size indicates water volume only.
It does not include the volume of powder
added when mixing.
Press the “powder setting” button repeatedly
to select your setting 1 - 10.
Press the “temp” button to select temperature.
The temperature indicator will ash when
heating and will stay solid when the set
temperature is reached.
= Slightly warmer than body temperature
= Body temperature
= Room temperature
Press the “ounce” button repeatedly to select
the ounces of water you want to dispense.
Rell the powder when the arms of the
stirring wheel become visible. This is very
important for accurate formula measuring.
PLEASE NOTE: The level will appear higher
than the ounce size selected because of added
powder volume and/or variance in
bottle markings.
The formula pro will remember the setting
& ounce size even if it is unplugged or
turned o.
You do not need to select a powder setting
every time you make a bottle.
You can always change the ounce size or
powder setting by pressing the buttons again.
Example: 4 ounces of water plus powder volume
is approximately 4.5-4.75 ounces depending on
your formula powder type.
It is essential that you choose the correct
setting for your formula brand and type.
Go to babybrezza.com/FPA to nd the
correct setting for your formula powder.
Check the level
of mixed formula.
Make sure your Formula Pro® Advanced is plugged in and turned on.
Some clumping may occur with some formula
powders inherently dicult to mix with water.
IMPORTANT
109
Loading ...
Loading ...