Loading ...
Loading ...
Loading ...
With the CO2 injector
pointing forward, screw
your chilled bottle in until
it is rm. Then push the
base of the bottle gently
forward until it is in the
upright position.
Finally, gently pull the
bottom of the bottle
forward. You will hear the
remaining CO2 escape
from the bottle. Unscrew
the bottle.
You a
re now
ready to add your avour
or just enjoy straight!
Pull the base of the
bottle forward and
unscrew to remove it
from the Sparkling Water
Machine. Fill the bottle
with tap water to the
indicator line approx
5cm from the neck of the
bottle and place in the
fridge to chill.
Remove the seal and cap
from the top of the CO2
Cylinder and slide it up
through the base of the
Sparkling Water Machine
and rmly screw it up
into the thread at the top.
1 2
3
4 5
SPARK
TM
/ CLASSIC
TM
Setup Instructions
Press down on the
carbonation button
rmly for 1 second only
then wait a couple of
seconds and repeat this
process if required.
You may hear the
‘whoosh’ of the pressure
release valve. This is
normal.
Loading ...