Loading ...
Loading ...
Loading ...
10
10. Select WATER LEVEL and
RINSE options
11. Press START/PAUSE/Unlock Lid
to begin wash cycle
Press the START/PAUSE/Unlock Lid button to start the wash
cycle. When the cycle has nished, the Complete status light
will light. Promptly remove garments after cycle has completed
to avoid odor, reduce wrinkling, and avoid rusting of metal
hooks, zippers, and snaps.
Unlocking the lid to add garments
If you need to add 1 or 2 missed garments after the wash
has started, simply open the lid and this will pause the cycle.
After adding the garments, simply close the lid and the cycle
will resume.
If, instead, you press the START/PAUSE/Unlock Lid button to
pause the cycle and then open the lid to add garments, you
will need to press the START/PAUSE/Unlock Lid button after
closing the lid to resume the cycle.
NOTE: Washer will not ll with the lid open.
IMPORTANT: If lid is left open for more than 10 minutes,
the water will pump out automatically.
Manual soak
If you would like to manually soak your garments at any time
during the wash portion of the cycle, press START/PAUSE/
Unlock Lid and leave the lid closed. Once your desired soak
time has elapsed, press START/PAUSE/Unlock Lid again to
continue the cycle. As long as the lid remains closed, your
soak time can be longer than 10 minutes. However, if the lid
is opened during the soak and remains open for more than
10 minutes, the water will pump out automatically.
Select the number of rinses by turning the Rinse knob to the
desired setting.
IMPORTANT: The Rinse knob must be set to an option “with
Fabric Softener” when using the fabric softener dispenser. This
ensures that fabric softener is added at the correct time in the
rinse for even distribution.
Set the Water Level knob to the Auto setting and the washer will
automatically sense the appropriate water level for the load size
and type.
Set the Water Level knob to the Deep Fill setting and the washer
will ll to the maximum water level.
Note: The cycle will be longer due to extended ll times when
using the Deep Fill setting.
Loading ...
Loading ...
Loading ...