Loading ...
Loading ...
Loading ...
Settings AUDIO OUT connectors
Height Sp Dolby Sp NOTE Front Layout Middle Layout Rear Layout HEIGHT 1 HEIGHT 2
HEIGHT 3/
FRONT WIDE
4ch 2ch
z3 z6
Front Height Surround Dolby Rear Height Front Height Rear Height Surround Dolby
Top Front Surround Dolby Top Rear Top Front Top Rear Surround Dolby
2ch 4ch
z3 z6
Front Height Surround Dolby
Back Dolbyz1
Front Height Back Dolby Surround Dolby
Front Dolby Top Middle
Back Dolbyz1
Front Dolby Back Dolby Top Middle
Front Dolby Surround Dolby Rear Height Front Dolby Rear Height Surround Dolby
None 6ch
z3 z6
Front Dolby Surround Dolby
Back Dolbyz1
Front Dolby Back Dolby Surround Dolby
z1
This can be selected when using Surround Back speakers.
z2
For the best Auro-3D experience Surround Height speakers are recommended, however you may substitute Rear Height speakers from a Dolby Atmos speaker setup
in place of Surround Height speakers.
z3 This can be set when “Assign Mode” in the menu is set to “13.1ch” or “11.1ch”. (v p. 228)
z4
Use 2 sets of Height speakers in the appropriate sound modes for Dolby Atmos, DTS:X or Auro-3D playback.
Use the Front Height and Rear Height speakers for Dolby Atmos or DTS:X playback.
Use the Front Height and Surround Height speakers for Auro-3D playback.
z5 This can be set when “Assign Mode” in the menu is set to “13.1ch” or “11.1ch”, and “Floor” is set to “5ch” or “5ch & SB”. (v p. 230)
z6
This combination cannot be selected when Front Wide speakers are being used.
Contents
Connections Playback Settings Tips Appendix
235
Front panel Display Rear panel Remote Index
Loading ...
Loading ...
Loading ...