Loading ...
Loading ...
Loading ...
49-2000855 Rev. 0 9
BAFFLE GREASE FILTERS AND DRIP TRAYS (on some models)
Some models have reusable metal grease baffles and drip
trays.
The metal baffles channel grease released by foods on the
cooktop into the drip trays. The baffles also help prevent
flaming foods on the cooktop from damaging the inside of
the hood.
For this reason, the baffles must ALWAYS be in place
when the hood is used. The grease baffles and drip trays
should be cleaned once a month, or as needed.
To clean the grease baffles and drip trays, drain and
wipe all excess grease with a dry paper towel. Soak them
and then swish them around in hot water and detergent.
Don’t use ammonia or ammonia products because they will
darken the metal. Do not use abrasives or oven cleaners.
Rinse, shake and let them dry before replacing. They may
also be cleaned in an automatic dishwasher.
To remove:
Grasp the baffle knobs and pull them up, forward and out.
Grasp the drip tray and carefully lift it up and out of the
hood track.
To replace the drip trays:
1. Place and seat the drip tray into the hood track.
2. Slide them left or right until all trays are side-by-side in
place in the track.
To replace the baffles:
1. Hold the baffle at the bottom by one of the knobs.
2. Place the other end of the baffle against the inside front
of the hood.
3. Slide it up and push the bottom end back until it firmly
seats into place.
CARE AND CLEANING
Drip Tray Replacement
Baffle Replacement
Drip Tray
Drip Tray
Track
Baffle
Loading ...
Loading ...
Loading ...