Loading ...
Loading ...
Loading ...
www.puretecfitness.com
12
COMPUTER INSTRUCTIONS
FUNCTIONAL BUTTON:
MODE/RESET – Push down to select functions.
– Push down to reset time、distance、calories ODO and pulse for 4 seconds.
FUNCTIONS AND OPERATIONS
1.
S
CAN:
Press M
O
D
E
but
t
on
unt
il
▼
“ ” appear
s at S
C
A
N
posi
t
ion,
m
oni
t
or
will
rotat
e
through the following functions: time、speed、distance、calorie、ODO and pulse,
each display will be hold 4 seconds.
2.
TIME : Count the total time from exercise start to end.
3.
SPEED: Display current speed.
4.
DISTANCE: Count the distance from exercise start to end.
5.
CALORIE: Count the total calories from exercise start to end.
6.
ODOMETER：monitor will display the total accumulated distance.
7.
PULSE RATE: Press MODE button until “▼” appears at PULSE position.
Before measuring your pulse rate, please place your palms of your hands on both of
your contact pads and the monitor will show your current heart beat rate in beats per
minute(BPM) on the LCD after 6~7 seconds.
Remark: During the process of pulse measurement, because of the contact jamming,
the measurement value may be higher than the virtual pulse rate during the first 2~3
seconds, then will return to normal level. The measurement value can not be regarded
as the basis of medical treatment.
NOTE：
1.
If the display is faint or shows no figures ,please replace the batteries.
2.
The monitor will automatically shut off if there is no signal received after 4 minutes .
3.
The monitor will be auto-powered on when starting to exercise push button
w/signal in.
4.
The monitor will automatically start calculating when you start to exercise
and will stop calculating when you stop exercising for 4 seconds .
Loading ...
Loading ...
Loading ...