Loading ...
Loading ...
Loading ...
Watersoftening system
The dishwasher requires soft water to ensure proper washing results.
Your appliance is equipped with an internal water softening system.
However, if you have a household water softening system, you will not
need to use this softening system.
The required amount of salt depends on the degree of hardness of your
tap water (See table for more information).
For the water softening system to function properly, it will need to use
dishwasher water softener salt .The amount of salt dispensed can be set
from "H:00" to " H:07". Salt is not required at H:00 (this is the default
factory setting).
. Open the door (for hidden controls only).
. Turn the unit on using the ON/OFF button.
. Hold down the "A" button and press START button until the display
indicates "H:00".
. Release both buttons.
. Press "B" to select the desired setting.
tap set value use
water hardness at
ppm CaCO3/I dishwasher salt
0- 110 H:00 no
120- 140 H:01 yes
150- 180 H:02 yes
190 - 210 H:03 yes
220 - 290 H:04 yes
300-370 H:05 yes
380 540 H:06
. - _ _ yes
550-890 H:07 yes
Defaultsetting from factoryis H:00
To change the setting,
. Press "C" button to select desired setting.
. Save the selected language by pressing the START button.
. Close the door (for hidden controls only).
NOTE: For information on how to use the water hardness test strip,
provided in the detergent sample kit, please see below.
Using a water hardness test strip
_Jrzetn_uchen ojpbay (I _), P_n_zb nt W AOI(A_JI@ ®
(i _), te_ht _- s_ off exce_ {1 _) _uttez Y __° =
sct_n u_ nach water arid _m_re fex¢_ d'eau et corn- _ zu[ mlr_1
1 rain a_n, _t 1 _&_, _rez 1 _n, ,, _rWa
¢ 1
>l&B°_l&lff
>14°_ >11 _ ' _ _rd_i_r
I
I
I
I
I
DDDDI
DDDNI
DDNNI
DIINI
mmmml
0
0
2
4
6
no
no
yes
yes
ves
Loading ...
Loading ...
Loading ...