Loading ...
Loading ...
Loading ...
Aregularinspection and maintenance of your machine will help to prevent
faults. This saves time and prevents problems.
Overall condition of the machine
Check spray arm for grease and limescale deposits.
If you find such deposits:
. Fill detergent dispenser with detergent.
. Start the appliance without utensils in the program with the highest
rinsing temperature.
Clean the appliance with detergents/appliance cleaners which are
particularly suitable for use with dishwashers.
. Regularly clean door seal with a damp cloth.
Never use a steam cleaner to clean your dishwasher. The manufacturer
is not liable for any consequential damage.
Regularly wipe the front of the appliance and fascia with a damp cloth;
water and a little washing up liquid are adequate.
Do not use sponges with a rough surface or abrasive detergents, as
these could scratch the surfaces.
Stainless steel appliances: To prevent corrosion, avoid using sponge
cloths or wash them out thoroughly several times before using for the
first time.
Filters
The filters keep large foreign objects in the rinsing water away from the
pump. These foreign objects may occasionally block the filters.
The filter system consists of a coarse filter, a flat fine filter and a
microfilter.
. After each washing cycle check the filters for residue.
. Unscrew filter cylinder as illustrated and take out filter system.
. Remove any residue and clean filters under running water.
. Re=install filter system in reverse sequence and ensure that the arrow
marks are opposite each other after closing the filter system.
Spray arms
Limescale and contaminants in the rinsing water may block nozzles and
bearings on the spray arms.
. Check outlet nozzles on the spray arms for blockages.
. Unscrew the upper spray arm.
. Remove the lower spray arm.
17
Loading ...
Loading ...
Loading ...