Loading ...
Loading ...
Loading ...
9
ASSEMBLY INSTRUCTION
BATTERY
IMPORTANT! The battery pack is not charged when it is purchased. Before using the trimmer
for the rst time, place the battery pack in the battery charger and charge. Make sure to read all
safety precautions, and follow the instructions in the Battery Charger section.
To remove (See Figure 2.)
1. Press the latch button (1) on the battery pack down and hold.
2. Grasp the blower (2) rmly, and pull the battery pack out of the handle.
NOTE:
The battery pack ts into the handle snugly in order to prevent accidental dislodging. It
may require a strong pull to remove it.
Fig. 2
1. Align the tongue (3) of the battery pack with the cavity in the blower housing.
2. Grasp the blower (2) rmly.
3. Push the battery pack into the handle until the latch locks into place.
4. Do not use force when inserting the battery pack. It should slide into position and “click”.
To install (See Figure 2.)
2
3
WARNING
Follow these instructions in order to avoid injury and to reduce the risk of electric shock or re:
• Replace the battery pack or the charger immediately if the battery case or charger cord is dam-
aged.
• Verify that the switch is in the OFF position before inserting or removing the battery pack.
• Verify that the battery pack is removed and the switch is in the OFF position before inspecting,
adjusting, or performing maintenance on any part of the blower.
• Read, understand, and follow the instructions contained in the section entitled Charging Proce-
dure.
1
Loading ...
Loading ...
Loading ...