Loading ...
Loading ...
Loading ...
ASSEMBLY INSTRUCTION
10
Fig. 3
1
2
3
Nozzles
(See Figure 3.)
The two nozzles extend the reach of the blower.
For blowing (See Figure 3.):
1. Align the widest end of the large nozzle (1) with the front opening on the blower (2).
2. Slide the nozzle over the blower outlet opening until the latch on the blower is inserted into the
opening on the nozzle.
3. Slide the smaller tapered nozzle (3) over the large nozzle until the latch on the large nozzle is
inserted into the end of the opening on the small nozzle and locks into position.
Loading ...
Loading ...
Loading ...