Loading ...
Loading ...
Loading ...
9
INSTALLATION
Selecting a Suitable Location
When selecting a position for your unit, ensure the floor is flat and firm, and the room is well ventilated.
Avoid placing your unit near a heat source (i.e., oven, radiator, or hot water system). Avoid direct sunlight
as it may increase the electrical consumption. Extreme cold temperatures may also cause the unit to not
perform correctly. This unit is not designed for use in a garage or outdoors. Do not drape the unit with any
covering.
When installing the unit, ensure that 10cm of free space is allowed to the left, right and rear of the unit, and
30cm at the top. This will allow cold air to circulate around the unit and improve the efficiency of the
cooling process.
Door Space Requirements
Levelling the Unit
Figure 1a
The unit’s door must be able to open fully as pictured in
Figure 1a.
To level the unit, adjust the two feet at the front of the
unit – turning clockwise to extend and counter-
clockwise to reduce as shown in
Figure 1b.
If the unit is not level, the door and magnetic seal
alignments will not be covered properly, leading to
inefficient refrigeration performance
Ensure that the feet all touch the ground before use.
Figure 1b
Loading ...
Loading ...
Loading ...