QRT-502 User Manual

Loading ...

Omni Wi-Fi IP Camera User’s Manual

Web Client

Network Conguraon

Select this menu opon to congure the network and DDNS service sengs.

Congure the Basic Network Sengs

Click Basic Network Sengs to congure how the camera connects to the network.

This camera provides two network connecon opons: Stac IP (Stac Address) and DHCP (Dynamic Address).

• Stac IP: Select this connecon if the camera is directly connected to a DSL modem and your ISP has supplied you

with a predened IP for your Internet connecon.

• DHCP: Select this connecon if the camera is connected to a router and DHCP is enabled.

Obtain IP from DHCP Server: Check this box to select DHCP network connecon if the camera is connected to a router

and DHCP is enabled.

IP Addr: Enter the stac IP address.

Subnet Mask: Enter the subnetwork IP address.

Gateway: Enter the gateway IP addresss.

DNS Server1/2: Enter the DNS server address. DNS Server1 is the primary DNS server and DNS Server2 is a backup

DNS server. Usually should be enough just to enter the DNS Server1 server address.

Hp Port: Enter the port number that you will use to log in to the device via the web.

NOTE:

• The IP Addr, Subnet Mask, Gateway, DNS Server1, and DNS Server2 opons are only available when the Obtain IP

from DHCP Server funcon is disabled.

• Obtain these informaon from your network administrator or your Internet Service Provider (ISP).

• If you cannot use the either of the two default media.web ports, 80 or 38401, the specied port may be occupied

by other programs or it is being blocked by your service provider. Enter other port number. In this case, you need

to add the port number aer the IP address. For example, if you set the Web Port as 85, you need to enter the IP

address as “192.168.3.103:85”.

Loading ...

AmazonBasics QRT-502