Loading ...
Loading ...
Loading ...
5
(3) Installation – Fitting the Rangehood
T
h
i
s
Ra
n
gehood must be placed at a distance of 65cm minimum from the
cooking surface of a cooker/hotplate and 120cm minimum from the
cooking surface of a BBQ.
3.1 Fixed to Wall.
3.1.1 Drill 4 x 8mm holes into the wall according to dimensions shown
below.
3.1.2 Insert the wall plugs supplied into the holes. Ensure that you use
appropriate fittings for the type of wall which will easily support the
weight of the Rangehood.
3.1.3 Fit the two metal brackets to the top of the Rangehood with the
13mm long screws supplied.
3.1.4 Insert the two lower 30mm long screws supplied into the wall
plugs/fitting, tighten the screws but leave a slight gap for the Rangehood
to hook on to the screws.
3.1.5 Lift the Rangehood onto the screws and fully tighten the screws.
3.1.6 Fit the two upper 30mm long screws supplied through the bracket
and into the wall plugs/fittings and tighten the screws.
3.1.7 Fit the plastic outlet to the top of the Rangehood by snapping it into
the hole. Make sure the outlet is fitted all the way around.
3.1.8 Fit the Flexible Duct (not supplied) to the outlet.
3.1.9 Exhaust the Flexible Duct to the outdoors and fit a one way valve
to prevent rain & dust entering into the Rangehood.
Loading ...
Loading ...
Loading ...