Loading ...
Loading ...
Loading ...
13
Leakage between the
c
o
n
n
e
c
t
i
on of U-shaped
section and Rangehood
Remove U-shaped
section and seal
Vibrations The flaps are damaged and
causes shaking
Call for service.
The motor is not fixed
securely to the Rangehood
body
Call for service.
The Rangehood body is not
fixed securely to the wall
Notify your installer.
Insufficient suction The distance between the
Rangehood and the cooking
surface is too much
Notify your installer.
Too much ventilation from
open doors or windows
Close doors or windows,
choose an alternative
location, if possible,
away from draughts.
The Rangehood
inclines
The fixing screws are not
tight enough
Notify your installer.
The hanging screws are not
tight enough
Notify your installer.
Rangehood switched
off during operation.
The safety cut-out device has
activated.
Switch off the
Rangehood and wait for
the device to reset.
If the Rangehood has
been installed below the
minimum heights
indicated in this manual
please notify your
installer.
Eurostyle Group trading as Euro Appliances
Service Line: (08) 8165 1012
Fax: (08) 8165 1018
Email: adm[email protected].au