Loading ...
Loading ...
Loading ...
;_ IU r,,/_loC rriul_t| Ur |VI_.,IVVr'M
Loosen Nuts "D". Scre+w Nuts _iC" up onto Suspension
Arms (Fig. 28). NOTE: SCREW NUTS "C" ON BOTH
SUSPENSION ARMS THE SAME NUMBER OF TURNS
SO MOWER WILL REMAIN LEVEL Tighten Nuts "D"
securely,
2., TO LOWER FRONT OF MOWER
Loosen Nuts "C _. Screw Nuts "D" down Suspension Arms,
NOTE: SCREW NUTS "D" THE SAME NUMBER OF
TURNS SO MOWER WILL REMAIN LEVEL Tighten
Nuts "C _ securely.,
3o With mower deck at desired height, set Gauge Wheels (Fig_
17) to lowest position without touching the ground_
Use Adjustment Handle to set mower at the approximate
cutting height you need. Use Clevis Pins (Fig,, t7) to set gauge
wheels at lowest point without touching the ground.
MOWER OPERATION
When ready to mow, lower Attachment Handle {Fig. 21)
to preferred mower height, Select a gear that allows mowing
at full throttle. This allows the mower blades to lift and cut
the grass efficiently
MOWER ENGAGEMENT
Pull Clutch Switch {Fig. 22) out and up to engage clutch. There
will be an engine hesitation as the clutch engages. NOTE: THIS
TRACTOR IS EQUIPPED WITH AN OPERATOR PRESENCE
SENSING SWITCH. ANY ATTEMPT BY THE OPERATOR TO
LEAVE THE SEAT WITH THE ENGINE RUNNING AND THE AT-
TACHMENT CLUTCH ENGAGED WILL SHUT-OFF THE
ENGINE,
DEPTH ADJUSTMENT
Fine adjustment of mower height is controlled by the Depth
Adjustment Knob, Turn clockwise (_) to raise mower Turn
counterclockwise (_) to lower mower (Fig, 22)
CLUTCH SWITCH _
'*ON" POSITION
NUT "D"
NUT "D"
SUSPENSION
ARMS
FIGURE 20
ATTACHI_NT
HANDLE
FIGURE 2'1
CLUTCH
SWITCH
"OFF"
POSITION
DEPTH
ADJUSTMENT
KNOB
FIGURE 22
Loading ...
Loading ...
Loading ...