Loading ...
Loading ...
Loading ...
9
Installation
Attaching the Stand
―
Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
―
Disassembly is the reverse order of assembly.
1
2
Put the stand base onto the stand neck as the
direction shown in the figure. Check that the stand
neck is firmly connected to avoid injury caused by
falling of the base.
Tightly fasten the connecting screw at the
bottom of the stand base. Fasten the large
screw in the middle for assembly.
3
4 5
Push the assembled stand into the main body in the direction of
the arrow as shown in the figure.
Stand up the monitor as shown in the figure. After installing the stand, place the product
upright.
Caution
Do not arbitrarily remove the panel film. If
not observed, the warranty service may be
restricted.
Preparations
Chapter 02
Loading ...
Loading ...
Loading ...