Loading ...
Loading ...
Loading ...
5
36" (91.4 cm) SIMU536
A. Left front surface cooking area display
B. Left rear surface cooking area display
C. Surface cooking area off
D. Center surface cooking area display
E. Heat level display
F. Right rear surface cooking area display
G. Right front surface cooking area display
H. Power on/off
I. Simmer
J. Melt + Hold
K. Timer display
L. Timer (increase/decrease)
M. Heat level slider
N. Left side bridge
O. Right side bridge
P. Control lock
Induction Cooking
Induction cooking is quite different from traditional forms of
cooking. The heat is generated directly in the pan, keeping
the cooking surface cooler than a traditional element.
Induction cooking does not lose as much heat as traditional
forms because all the heat is created in the pan itself.
The cooktop heats up or cools down quickly after the controls
are set. It also stops heating when the pan is removed without
turning off the power.
Food spilled on the cooktop surface will not burn because the
glass is not heated. Induction cooking allows for immediate
cleaning after use because the heat is created in the pan.
Pan size, material (see “Cookware” section), and positioning
is very important to achieve maximum wattage.
The diameter of the pan’s base should be equal to the size
of the element.
If the pan is too small, the burner does not sense the pan
and will not activate.
Cooktop Controls
The touch-activated electronic controls offer a variety of heat
settings for optimal cooking results. When melting foods such
as chocolate or butter, the surface cooking area can be set to
the Melt function for minimal cooking power.
For maximum surface cooking power, all cooktop touch-activated
electronic controls can be set to Performance Boost function
when bringing liquids to a fast and rapid boil. Touch BOOST to
immediately reach the highest setting.
NOTE: This cooktop will also work with a 208V operation
where 240V installation is not available.
First use or after a power failure:
After connecting the cooktop to an electrical power supply
or after a power failure, the control panel will be locked. An
indicator light above the key icon will be on. To unlock the
control panel, press and hold CONTROL LOCK for 3 seconds.
The indicator light will turn off, and the cooktop is ready for use.
WARNING
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
NJ
F
M
K
A
B
I
G
LH O P
Power
Simmer
Melt
B
Control
Lock
B
TIMER
SIM
MELT
SIM
MELT
SIM
MELT
SIM
MELT
OFF
OFF
OFF
OFF
OFF
SIM MELT
C
D E
Loading ...
Loading ...
Loading ...