Loading ...
Loading ...
Loading ...
11
■ Is the display flashing “Er” and numbers? If an “Er”
and a series of numbers appear in the display panel, turn
power off at the circuit breaker. Turn on again. If problem
continues, call customer service.
■ Is the display flashing “F” or “C” and numbers? If “F” or
“C” and a number are alternately flashing on the display,
refer to the following table for possible solutions.
Error
Code
Error Solution
Cooktop
has turned
off and is
beeping
every
10 sec.
An object, liquids
or soils are putting
pressure on the
control panel.
Thoroughly wipe or
remove any object on
touch keys.
F42, F43
The power voltage
is too low or too
high.
Turn off the cooktop. Wait
5 seconds, then turn it
back on. If this continues,
contact a qualified
electrician.
C81, C82,
C83
The surface
cooking area has
overheated.
The surface cooking area
automatic shutoff was
activated. Wait 5 minutes
for it to cool down, and
then turn it back on. Turn
off oven if it is running a
self cleaning cycle.
F12, F21,
F25, F36,
F37, F40,
F47, F56,
F58, 560,
F61, F62,
F63, F64
Call customer service.
Operational cooktop sounds
■ Is there a low humming? This occurs when cooking
at high power. The cause of this is the amount of energy
that is transmitted from the appliance to the cookware.
This sound will quiet or go away when the power is
turned down.
■ Is there a crackling? This sound occurs when cookware
is used that consists of different materials. The noise is
caused by vibrations in the joint faces between the different
layers. It may change depending on the amount and type of
food being cooked.
■ Is there a fan noise? The electronics require a controlled
temperature in order to function reliably. The cooktop is
fitted with a fan that runs at various speeds according to
the temperature detected. The fan may also continue to
run even after the cooktop has been switched off if the
temperature it detects is too high.
Loading ...
Loading ...