Loading ...
Loading ...
Loading ...
- 5 -
WK-125456 EN
HOUSEHOLD USE ONLY
PARTS DESCRIPTION
1. Lid
2. Handle
3. Water Gauge
4. On/Off Switch and indicator light
5. Filter
BEFORE USING YOUR KETTLE
If you are using the kettle for the first time, it is recommended that you clean your kettle before use by
boiling a full kettle of water twice and then discarding the water.
OPERATION OF YOUR KETTLE
1. Open the lid; pour out left over water from previous boiling cycle and fill with the desired amount of
fresh water to the water kettle. Always fill the kettle between the minimum and maximum marks. Too
little water will result in the kettle switching off before the water has boiled.
NOTE: Do not fill the water over the maximum level, as water may spill out of the spout when boiling.
Ensure that the lid is firmly in place before connecting the power cord to the outlet.
2. Connect the plug into a power outlet. Press the switch downwards. The indicator will light up. Then
start to boil the water. The kettle will switch off automatically once the water has boiled. You can shut
off the power by pressing the switch upwards at any moment during boiling water.
NOTE: Ensure that switch is clear of obstructions and the lid is firmly closed. The kettle will not turn off
if the switch is constrained or the lid hasn’t been closed.
3. Take the plug out of the outlet. Lift the kettle then pour the water.
NOTE: Once the water boils, wait 10 seconds before pouring out water to prevent hot steam from
exiting through the lid of the kettle. Operate carefully when pouring the water from your kettle as
boiling water will scald.
4. The kettle will not re-boil until the switch is pressed downwards. Allow to cool for 30~40 seconds
before reopening to boil water. Never re-boil water older than 2 hours.
NOTE: Ensure power supply is turned off when kettle is not in use.
5. Should you accidentally allow the kettle to operate without water; the boil-dry protection will
automatically switch it off. If this occurs, allow the kettle to cool before filling with cold water and
re-boiling.
CARE AND CLEANING
1. Always let the kettle cool down first and disconnect the appliance from the power outlet before
cleaning.
2. Never immerse the kettle area or cord in water, or allow moisture to contact with these parts.
CLEANING APPEARANCE OF HOUSING
Wipe the appearance of body with a wild and damp cloth or cleaner, never use a poisonous cleaner.
Descale regularly, preferably at least once a month and more frequently if your water is very hard.
To descale your kettle, use:
• white vinegar
- fill the kettle with half a litre of vinegar
- leave to stand for 1 hour without heating
Loading ...
Loading ...
Loading ...