Loading ...
Loading ...
Loading ...
4
Mounting your Camera
1
2
3
The camera has three points of articulation. The most obvious is the hex
screw secured elbow joint in the centre of the stand (2). This one is pretty
obvious and straight forward – using an Allen key, loosen the hex screw
and adjust to the position you want (up or down). Tighten the hex screw
again to secure in place.
The second point of articulation (1) is the radial joint where the neck of
the stand is attached directly to the camera. To adjust this joint, loosen
the hex screw on each side. This enables you to spin the camera left or
right so no matter what direction the camera is facing, your images will
be oriented correctly. Tighten the hex screw again to secure in place.
To rotate the camera left or right (3), loosen the hex screw on each side
then tighten again to secure in place.
Of course, there will always be some outlying cases where the camera
and stand simply won’t fit where you want to mount them. Maybe you
have a hanging awning, or a drain pipe in an inconvenient spot. In these
cases, we suggest obtaining a mounting bracket, which should be
available from any good hardware store.
Loading ...
Loading ...
Loading ...